Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Roof console in Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Roof console in Hilux

Post by Yumsylux »

I was wondering if anyone out there who has a rood console would like to post a couple of pics up. I'm wanting to fit one in my 1994 lux. Could you tell me whereabouts you mount the brackets to and how much weight can one hold in the console. I'm hoping to be able to put my cb and maybe a map or two in it. I'd really like to know where you bolt the console to most importantly. Thanks guys.
Top
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Post by Trusa »

I made the template up for mine tonight (92 extra cab), hoping to build it next weekend. Easiest place to mount them is at the rear view mirror and interior light. The one in my 80 is mounted like this and could handle a couple of kilos easily. This is how I'll be mounting the one in the lux, using a piece of flat steel to mount under the mirror and relocating the interior light into the console so you screw the console in through the hole made for interior light, then screw the light over the hole.

Hope that helps. Could get some pics of the one in the 80 tomorrow if you like?

Ben
Top
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

Yes please. Thanks for that Trusa. I looked at the screws that hold the mirror and light and they look so small I didn't think it'd be strong enough to hold much weight. I guess a CB and some lights aren't really that heavy. Maybe 2kgs at the most? What are you making the console out of? I was thinking some either really thin ply or some 3mm MDF with marine carpet?
Top
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Contact:
Contact Bowhunter

Post by Bowhunter »

I just fitted one from a Jeep Grand Cherokee into mine... works a treat! :P
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Top
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

Hey mate if your interested I make and sell them on ebay for Hilux`s. I have one here ready to go if you want one. pm me if your interested. They can take a fair bit of weight.

Here are some pic`s of the console .I`ll take some pic`s of the one in my car tomorrow for you. cheers
http://s84.photobucket.com/albums/k11/k ... 20console/
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Top
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

yeah that'd be awesome if you could send me a couple of pics to see. I've been trying to find them on ebay but dont seem to find any. That's why I was going to make my own. I'm pm you my email add now.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 57 guests