has anybody checked and adjusted the tappet clearance on the 4M40 motor?
if so, is it worth doing myself or get someone to do it. they run solid shims that would need replacing if clearance out.
i have been quoted anything from $90 to $250 for adjustment, depending on number of shims req.
also quoted $400 for injector service.
how do these prices sound?
car has done 126,000km and has not had the valves(or anything else) adjusted since i got it with 57000km on.
cheers
neil
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8td tappet clearance
Moderator: -Scott-
2.8td tappet clearance
99 GU Patrol Wagon 4.2td
Who is online
Users browsing this forum: No registered users and 1 guest