Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Beadlocks Leaking

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 26
Joined: Tue Sep 05, 2006 3:46 pm
Location: newcastle

Beadlocks Leaking

Post by aza280 »

I have just finished off a set of mechanical beadlocks it was a DIY kit from YURI 4x4 everything is good except the tyres are leaking from the outside bead between the two rings. All welds were checked its not leaking from there and all bolts are done up to reccomended tourqe settings. Anyone got any ideas on how to stop them leaking. :x

Cheers Aza
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

silicone
turbos are nice but i'd rather be blown
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Re: Beadlocks Leaking

Post by tuf045 »

aza280 wrote:I have just finished off a set of mechanical beadlocks it was a DIY kit from YURI 4x4 everything is good except the tyres are leaking from the outside bead between the two rings. All welds were checked its not leaking from there and all bolts are done up to reccomended tourqe settings. Anyone got any ideas on how to stop them leaking. :x

Cheers Aza
maybe ask Yuri 4x4 if there any solutions, what sort of tyres?
Reptile fabrication.
www.agroautomotive.net
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

sikaflex!
but yeah definitely contact them.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

they shouldn't leak from between the rings because the tyre bead should seal them together.

I'd say it is leaking between the inner ring and the wheel, best option is to take the outer ring off, prop the tyre up a bit and smear a heap of silicone around the inner ring where it is welded to the wheel.

If it is only a small leak you could try some of that puncture repair goo in a can.

Chris
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests