Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2" lift from Maverick on Nissan?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 23
Joined: Sat Sep 20, 2003 11:06 pm
Location: Sydney

Contact:
Contact tanky

2" lift from Maverick on Nissan?

Post by tanky »

Was told the 2" lift from Ford Maverick 93 TD42 will fit on mine 98 Patrol TD28. The left and right front spring from the lift are different, left one is shorter about 20mm. The factory springs on mine Patrol are the same lenght. Will it really fit or the axle on Maverick is different? Thanks for help.
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

They will fit no probs. All Mav / GQ / GU are compatible in the spring / shock dept.

Drivers side is longer to compensate for the driver preloading that side a greater proportion of the time... helps eliminate uneven sag of the drivers side.
Top
Posts: 23
Joined: Sat Sep 20, 2003 11:06 pm
Location: Sydney

Contact:
Contact tanky

Post by tanky »

But isnt 20mm a bit to much? And why the factory ones are the same lenght?
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

factory ones probably use a slightly different rate to achieve the same thing.
Driver, spare wheel and battery are all on RHS.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Put the kit on.

If its out by about 20mm loaded then just put a 10mm packer on top of rear spring (from ARB)


Most after market springs are longer on RHS esp rear.

Bazzle
Top
Posts: 23
Joined: Tue Jul 22, 2003 6:35 pm
Location: Gone Bush

Post by big_nissan »

Yep, coil packers can serve as a inexpensive height adjustment, anywhere from 10mm to 30mm (rear only). I run them in my truck and gave myself an extra inch in height and cost only about $100. :D :D
What drives up must roll down!
Top
Posts: 114
Joined: Fri Aug 08, 2003 2:28 pm
Location: Far Nth Coast NSW

Post by blu125 »

Dobinson's in Brisbane can supply properly designed packers for front or rear of Patrols in 10,15&30 mm sizes.
Top
Posts: 21
Joined: Mon Jun 30, 2003 7:27 pm

Post by Fisher »

Have you a contact number / web address for Dobinson's in Brisbane ?
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Fisher wrote:Have you a contact number / web address for Dobinson's in Brisbane ?


Oh, so now mister 3.0td wants some serious tech, does he? :rofl: (Sorry, had to say it)

Seriously though, their number 07 - 3355 9722
Dobinson Suspension
85 Pickering St Enoggera, Brisbane.
Built, not bought.
Top
Posts: 23
Joined: Sat Sep 20, 2003 11:06 pm
Location: Sydney

Contact:
Contact tanky

Post by tanky »

Thx all for help. As I was trying to find out more about this problem I asked in a few shops. I was told the springs should fit but they didn't recomended. The spring were designed for Ford and not Patrol and the weight of those two cars is different.
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

on most aftermarket springs the right hand springs are 10 mm longer and the springs are the same for mavrick/patrol/diesel/petrol.
try the kings springs website and check the part numbers for yourself.
have new computer with no favorites list, so from memory i think their site is www.kingsprings.com.au
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ford Maverick and Nissan Patrol Aust are the SAME weight .

Same susp on BOTH


Shop just trying you on...

Bazzle
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

tanky wrote:Thx all for help. As I was trying to find out more about this problem I asked in a few shops. I was told the springs should fit but they didn't recomended. The spring were designed for Ford and not Patrol and the weight of those two cars is different.


Yep, does sound like the shop is having a lend. I'd find a new shop... unless they were meaning that the carpet is different - hence the weight dissimilaraties... :lol: :lol:
Built, not bought.
Top
Posts: 21
Joined: Mon Jun 30, 2003 7:27 pm

Post by Fisher »

Area54 wrote:
Fisher wrote:Have you a contact number / web address for Dobinson's in Brisbane ?


Oh, so now mister 3.0td wants some serious tech, does he? :rofl: (Sorry, had to say it)

I'm just glad I don't have to put up with Nissan Australia. At least Nissan UK recall our trucks rather than have us all complaining on fourums like whinging Australians do. If you call spacers serious tech then you have some way to go.

I can't wait till we have our arses kicked in the world cup.



edit: fixed some sporting issues for you :cool:
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Fisher wrote:
Area54 wrote:
Fisher wrote:Have you a contact number / web address for Dobinson's in Brisbane ?


Oh, so now mister 3.0td wants some serious tech, does he? :rofl: (Sorry, had to say it)

I'm just glad I don't have to put up with Nissan Australia. At least Nissan UK recall our trucks rather than have us all complaining on fourums like whinging Australians do. If you call spacers serious tech then you have some way to go.

Can't wait to kick your srses in the world cup.


HAHAHA a Pom call an Aussie a whinger :rofl:
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Fisher wrote: If you call spacers serious tech then you have some way to go.


Listen mate, you are quickly losing friends. It doesn't matter if someone wanted the time of day on this site, I would have the time to answer them. Tanky had a question (just because it wasn't SERIOUS TECH to you big boy) that he didn't know the answer to, the people that had something positive to contribute did. You p!ss everyone off with your useless posts, its a pretty gutless thing to talk tough from the other side of the world. If you want to post crap - post it in the chit chat forum, not in the brand related tech forums.
Built, not bought.
Top
Posts: 21
Joined: Mon Jun 30, 2003 7:27 pm

Post by Fisher »

[/quote]

Listen mate, you are quickly losing friends. .[/quote]


I never considered you to be my friend - 'mate'
Top
Posts: 21
Joined: Mon Jun 30, 2003 7:27 pm

Post by Fisher »

[quote

I can't wait till we have our arses kicked in the world cup.


edit: fixed some sporting issues for you :cool:[/quote]



Typical - your refs will probably fix the results in just the same way.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Area54 wrote:
tanky wrote:Thx all for help. As I was trying to find out more about this problem I asked in a few shops. I was told the springs should fit but they didn't recomended. The spring were designed for Ford and not Patrol and the weight of those two cars is different.


Yep, does sound like the shop is having a lend. I'd find a new shop... unless they were meaning that the carpet is different - hence the weight dissimilaraties... :lol: :lol:


The badges are different I am of the belief that the nissan badges up until 1993 were lighter plastic, but the fords used a metal oval. This is the cause of the weight difference..... Oh and most of the mavs had discs rear.... some of the patrols didn't.... They are the same car though!
hands and mums dont count!!!
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

bj on roids wrote:The badges are different I am of the belief that the nissan badges up until 1993 were lighter plastic, but the fords used a metal oval. This is the cause of the weight difference..... Oh and most of the mavs had discs rear.... some of the patrols didn't.... They are the same car though!


yeah, most of the little differences stem from the fact that ford never released a pov-pack spec maverick.
Top
JBE
Posts: 258
Joined: Tue Oct 07, 2003 2:39 pm
Location: Sydney

Post by JBE »

I've just had a chat with an R&D technician at Lovells and he confirmed that:
- the 2" raised suspension kits for LWB Patrols are the same for the Maverick, the GQ and GU (petrol & diesel).
- the front coils are different in length (2mm difference); longer coil to be mounted on the right hand side. this is to offset the heavier load on the right hand side of the vehicle.

Cheers
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

2" kit for a mav/patrol here if any one is interested
http://www.outerlimits4x4.com/PHP_Modul ... php?t=8156
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests