Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hot X-90... literally
Hot X-90... literally
Ok... here's one I've never had before...
When I pull up at home in the X-90, it clicks and ticks like something cooling down. I opened the bonnet tonight and even the bonnet prop was hot, the front radiator support and even the cruise control unit. There was a crapload of heat under the bonnet which dissipated quickly once it was opened.
It's not overheating, there's heaps of coolant etc but it's like the whole underbonnet area was an oven. What gives?
Lack of airflow? Can't see anything caught up in the front intake areas etc...
When I pull up at home in the X-90, it clicks and ticks like something cooling down. I opened the bonnet tonight and even the bonnet prop was hot, the front radiator support and even the cruise control unit. There was a crapload of heat under the bonnet which dissipated quickly once it was opened.
It's not overheating, there's heaps of coolant etc but it's like the whole underbonnet area was an oven. What gives?
Lack of airflow? Can't see anything caught up in the front intake areas etc...
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
I've never had a prop that hot.
Have you done the bodylift yet? Not necessarily related to your problem but if you have then maybe (if you haven't already) you'll want to pack up the foam on the top of the radiator so the cool airflow goes through the radiator and not over the top.
Have you done the bodylift yet? Not necessarily related to your problem but if you have then maybe (if you haven't already) you'll want to pack up the foam on the top of the radiator so the cool airflow goes through the radiator and not over the top.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Might try that Huggy...
Bodylift not done yet cj... will check out the foam situation when we do it.
It's weird, never had a car do that
While we are talking underbonnets... anyone got anyideas about a dual battery tray? Supposedly a Vitara SWB one fits, but they are on the passenger side... seems the only space in an X90 is on the drivers
Bodylift not done yet cj... will check out the foam situation when we do it.
It's weird, never had a car do that
While we are talking underbonnets... anyone got anyideas about a dual battery tray? Supposedly a Vitara SWB one fits, but they are on the passenger side... seems the only space in an X90 is on the drivers
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Is the bonnet getting hot and holding the heat in ?
Its amasing how well one of those bonnet isulator actually helps.
basically you engine gets hot and the bonnet holds the heat.
had a similar problem in a 5L VS until we refitted the bonnet insulation.
Nick
Its amasing how well one of those bonnet isulator actually helps.
basically you engine gets hot and the bonnet holds the heat.
had a similar problem in a 5L VS until we refitted the bonnet insulation.
Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
[/quote]
Standard Factory fitment. They didn't shift the battery to the passengers side till later on. I picked up a spare from Lee at Suzi Four but if A1 has one it should do the job.Squik wrote:Ahhhh.... ok... where did you get them from?cj wrote:My old '93 lwb and my '94 swb (8v) battery trays were drivers side and look like they'd fit in there on yours.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
You have PMA1 wrote:If your after a batt tray I have 1 from my LWB that I no longer need could do with a paint ......could take to TT if you like.... and c if it fits
Dan
Re the heat....
Just had a major dig around under the bonnet, appears the front (thermo?) fan isn't working, just gotta do a little fuse location... anyone know if there are any "inline" fuses of relays around the fan itself?
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Yep... and BINGO!!!
A friend came over and went right over everything with a meter and it's a dicky plug that causing the fan to run intermittantly. He wiggled it around and it keep stopping and starting. It's this plug:
...problem is... how the fark do get the bugger open?? Won't even separate when the toggle is down...
A friend came over and went right over everything with a meter and it's a dicky plug that causing the fan to run intermittantly. He wiggled it around and it keep stopping and starting. It's this plug:
...problem is... how the fark do get the bugger open?? Won't even separate when the toggle is down...
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Gave up... both Podge and I tried every conceivable way to get it undone and we threw in the towel. I ended up cutting the wiring either end and busting it open for a squizz... lo and behold!
Some idiot had *glued* the %#%@! thing and the glue had eaten the connections. I've stripped, separated, and joined the wiring up with heaps of tape. I'm assuming as there was no relay or fuse in the plug this should be ok.... works perfectly
Now just need to monitor it and check whether heat-up issues are related only to aircond use... mind you, the air cond is FARKING cold now
If that's the case, can I just install a separate switch to run the fan without the aircond being on...? Instant thermo?
Some idiot had *glued* the %#%@! thing and the glue had eaten the connections. I've stripped, separated, and joined the wiring up with heaps of tape. I'm assuming as there was no relay or fuse in the plug this should be ok.... works perfectly
Now just need to monitor it and check whether heat-up issues are related only to aircond use... mind you, the air cond is FARKING cold now
If that's the case, can I just install a separate switch to run the fan without the aircond being on...? Instant thermo?
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Update:
Hmmmm ok... there is still a shitload of heat under there, to the point that if I run the engine for 30 minutes stationary I can barely touch the bonnet
My temp gauge goes up reasonably fast but stops at normal operating level, no indication of boiling issues in radiator, no leaking coolant... nothing.
But there is a lot of heat coming off the back of the raditor via the clutch fan... it's obviously doing it's job well.
Any ideas?
Hmmmm ok... there is still a shitload of heat under there, to the point that if I run the engine for 30 minutes stationary I can barely touch the bonnet
My temp gauge goes up reasonably fast but stops at normal operating level, no indication of boiling issues in radiator, no leaking coolant... nothing.
But there is a lot of heat coming off the back of the raditor via the clutch fan... it's obviously doing it's job well.
Any ideas?
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
not sure if this is any help by my j20a vitara has been bodylifted and i have filled the gap from the radiator to rad support panel with flat rubber sheeting & also my bonnet has the factory heat insulation on it and i can drive 20kays/30minute drive to work in the morning & when its cold the frost/moisture is STILL on the bonnet when i get to work. the engine ticks & crackles heaps after shutdown due to the heatsheilds on the exhaust manifold & cat but the bonnet is cool to touch. my gq pootrol had steam coming off the bonnet under the same conditions. also mine has factory rubber "side skirts" each side of the radiator.
cheerz
atari4x4
cheerz
atari4x4
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Mine still has the factory skirts so there's only only direction airflow can go... to the radiator face. There's no heat insulation on the bonnet.atari4x4 wrote:not sure if this is any help by my j20a vitara has been bodylifted and i have filled the gap from the radiator to rad support panel with flat rubber sheeting & also my bonnet has the factory heat insulation on it and i can drive 20kays/30minute drive to work in the morning & when its cold the frost/moisture is STILL on the bonnet when i get to work. the engine ticks & crackles heaps after shutdown due to the heatsheilds on the exhaust manifold & cat but the bonnet is cool to touch. my gq pootrol had steam coming off the bonnet under the same conditions. also mine has factory rubber "side skirts" each side of the radiator.
cheerz
atari4x4
I just got back from going down the supermarket without the aircond on on and whilst the temp gauge went up, the bonnet was still cool to touch, Big test will be tommorrow morning in peak hour traffic I suppose
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Not sure if it would work on the x-90, but on my rigs i have the bonet hindge spaced up slighty so the rear of the bonet sits slightly above the body, allowing hot air to blow out. It makes a slight difference to my zook underbonnet temp after a hot day crawling round a slow speed.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Yep.. that's my next option after I see what happens tommorrow. How far did you space it up?
Have been chatting with other X90 owners in the UK, seems that do tend to run warm. But they generally don't fit aircond.
Dunno, maybe it's the extra AC radiator sitting in front of the main one blocking airflow or something ... theoretically it would be running hot, thus the main radiator would be sucking in air that's already heated... am I wrong on this one?
I've got the aircond fan working now but it still ran hot
Have been chatting with other X90 owners in the UK, seems that do tend to run warm. But they generally don't fit aircond.
Dunno, maybe it's the extra AC radiator sitting in front of the main one blocking airflow or something ... theoretically it would be running hot, thus the main radiator would be sucking in air that's already heated... am I wrong on this one?
I've got the aircond fan working now but it still ran hot
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
I had a similar problem with the same plug also check the modulator on the air con box at passengers knees but this is only for the air con
Change the thermostat, flush the system check the thermo fan
By the sound of it you need to get on top of it before you cook it
Rolly
Change the thermostat, flush the system check the thermo fan
By the sound of it you need to get on top of it before you cook it
Rolly
suzis rock and f#@k the rest
will the a/c fan work as a thermo style of thing? i am running the std vit viscou fan and was thinking of using the vit a/c fan as extra airflow when in deep sand etc, only on a toggle switch maybe together with a temp sender.
nic
nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 24 guests