Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help asap - can't get gearbox back in

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 4
Joined: Sun Feb 25, 2007 9:18 pm

Help asap - can't get gearbox back in

Post by joeyree »

we can't get gearbox to go on all the way is there a trick
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

gearbox ???

Post by want33s »

If you are sure the clutch is aligned correctly, check the gap between the block and the bellhousing is EVEN, ALL the way around. Check there are no hoses or wires/cables in the way. There should be two dowel pins to line up, you may have to rotate box clock &/or anti-clockwise. ....not easy to describe a general purpose instruction when there are so many things that could be wrong. good luck!
Top
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

No, i think he hasnt got the clutch plate aligned properly!
Did you use an aligning tool. so the spiggot will go into the spiggot bearing?

Chop
I THINK ICAN, I THINK I CAN!
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Put some grease on input shaft,works all the time,Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

you might find the spline needs turning a bit
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest