Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Adjustable panhard?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Adjustable panhard?

Post by -Scott- »

I have yet to get a response from anybody who KNOWS how to find an adjustable panhard for a Pajero. I need to re-centre my diff before I take it in for rego inspection (tyre outside the guard on driver's side, inside on passenger's side.)

I have been offered a Patrol rod, but they can't tell me if it will fit.

Somebody else has offered to make something fit, for a higher price.

Yet another must be flat out working, and the PM is still in my Outbox. :cry:

Surely somebody's SAS'd Paj has an adjustable Panhard? What was used?

Help! Please!
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

I just luv my "clacker Jabber"
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

The supply and install price was less than that. :?
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Post by Hekta »

Scott I have an adjustable panhard on the rear of mine. I bought it off a mate who had originally made it for his GQ. I just had to buy bushes to suit.
It was easy to fit, just put it on wind the bar out a bit, put it in place, give the car a good shake around and repeat if it needed adjusting.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Cool - so it's a matter of finding bushes the correct OD for the panhard (Patrol bushes?) and the correct ID for the Paj?

Help out a noob - is that info available on the web, or do I need parts in my hand, and wander into (insert vendor here)?
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Post by Hekta »

You might find that an 'off the shelf' Patrol one might fit. Mine is a custom one that they guy built to fit his patrol. I just went into the local suspension shop with it and said "I need a bush that will fit in here, with this size hole in the middle."
I think they might've actually been Patrol bushes. It was a while ago, so I can't remember exactly.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

Hekta - did you find any noticeable increase in articulation offroad?
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Posts: 161
Joined: Mon Jan 06, 2003 4:46 pm
Location: USA

Post by Lordtrunks »

I made a drop down bracket at work for mine I did notice the truck handles better.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Lordtrunks wrote:I made a drop down bracket at work for mine I did notice the truck handles better.
I discussed this option with the engineer, and he didn't think it was worth the effort - my lift isn't that big, the angle isn't that great, but he doesn't like the forces which can be exerted on the mount (according to his calculations.) He has previously calculated that under certain bump conditions the force on the mount can be huge, and he was concerned a longer bracket would exert more leverage.

He was quite happy with the way the Paj handles as it is, and the adjustable rod is only to re-centre the diff - he's not concerned by the angle of the rod.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests