Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winch solenoids?

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

winch solenoids?

Post by Bartso »

i have some solenoids from my high mount that i have replaced with a titan solenoid
but my question is what are these solenoids rated at as i want to use them as a isolator for tuff truck as in a smaller switch opens the solenoid
maybe i should use 2 solenoids in parallel?
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Not sure what they are rated at but 1 will do the job, but for reliability I would run 2 in parallel to be safe.
KRiS
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

If they are the same solenoids I was given by BBM you can,t use them as Isolater as the legs they mount of are also a conductor,I had to take them back and get the proper Isolator solenoids where the mounting bracket is seperate to the electrical,I have 3 of them,Cheers Paul.

Two of them kill the power to the truck and the third charges the second battery with a manual over-ride to use it to start car as well.

Image


Image


Image
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests