Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TIRFOR CABLE

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

TIRFOR CABLE

Post by Wish I had coils »

Does anyone know much about tirfor cables? I have just got a 3.2t Tirfor it says on the side that i need 16mm cable. Qustion 1 do i have to have that size cable and Question 2 Where can i get some cable and approx how much?

Cheers
Top
Posts: 79
Joined: Thu Jul 21, 2005 9:26 pm
Location: Sydney

Post by manno74 »

answer 1. Yes, the cable needs to be that size as the tool works by clamping the cable (without damage!).

answer 2. You're best off going for the original gear, as the ends are tapered for feeding in to the tool, cost unknown, source any 4wd shop.
2000 GU II, 6.5L Chev Diesel (ex ZD30), lift, bar+winch, rear bar, drawers, fuel tanks I need a personal loan to fill... most of the regular touring gear.
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

take the old one to some one like nobles and they will make one with a tappered end for you
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

Don't have orignal cable, it did'nt come with one.

I got it cheap and thats probobly why, I'll check out the 4'by shops tommorow
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Nobles will be cheaper. They sell Tirfor cable.

Bazzle
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Chances are most 4x4 shops wont stock a 3.2T cable. Thats a big mother. Normal size is 1.6T. They may be able to get it in. As previously suggsted, try Nobels, or another specialist winch/lifting gear supplier, or find the Oz distributor.
Mud makes excellent toothpaste.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 15 guests