Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
supercharged TB motors
supercharged TB motors
anyone done it? just after some specs and pics etc....
i have been reading all the turbo threads and thinking of going turbo.... or twin turbo but ive also been thinking about a supercharger too.
i went wheeling up at the wattagans and a dude that came on the trip had a GQ with a blower on it but i cant remember if it was TB or TD
i have been reading all the turbo threads and thinking of going turbo.... or twin turbo but ive also been thinking about a supercharger too.
i went wheeling up at the wattagans and a dude that came on the trip had a GQ with a blower on it but i cant remember if it was TB or TD
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
This on the only guy i know of who did..
http://carl.outerlimits4x4.com/viewtopic.php?t=102091
http://www.patrol4x4.com/forum/showthre ... =64&page=2
He made good power!!
I just noticed his inlet temp is 18deg
Mine was 56deg
Rick...
http://carl.outerlimits4x4.com/viewtopic.php?t=102091
http://www.patrol4x4.com/forum/showthre ... =64&page=2
He made good power!!
I just noticed his inlet temp is 18deg
Mine was 56deg
Rick...
I forget the name of the place, someone here will know it for sure, I think it's called the 4WD workshop in Frankston. He's done heaps of supercharged TB's and says it's the only way to go. I spoke to him a while ago, and he really knows his stuff. You know someone is good when they do all the development work on a dyno and then don't give out their custom cam grinds, ie not mass produced and better.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
A mate of mine recently finished his. straight gas research runs well goes good sounds a treat have a squiz here:
http://www.patrol4x4.com/forum/showthre ... arged+tb42
ill get him to tell you all about it if you want
http://www.patrol4x4.com/forum/showthre ... arged+tb42
ill get him to tell you all about it if you want
where did u relocate it to?TUFFRANGIE wrote:Thats my Gq that mulisha has posted a link to, it is darren greens old setup. Vortech blower relocated power steering reseviour, autronich computer etc...
Makes good steady power only problem i had was throwing belts but one pulley was slightly out of alignment and it is now fixed.
Rob
theres a lot more room under a GQ than a GU
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 0 guests