hey
looking at getting a set from marks any one else using them? opinions?
thanks any info would be appriciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
marks reduction gears - whos using?
marks reduction gears - whos using?
>>> -- Push it till it breaks -- <<<
I think we got our wires crossed here.j-top paj wrote:i would if it was a GQ or something... but i dont really feel like cutting an extra hole in the GU
What I mean is a gear set with larger then 83% reduction wouldn't fit in the transfer case because of the size of the gears. Apparently they have to grind some of the casing out as it is to fit 83%.
83% is overkill for 99% of people and the tyres they run anyway so any more would be just plain useless.
Cheers mick.
Road Ranger
yeh i got the 4.88s and i need something to save my clutch a bit. so im gona do in when im changing the clutch to save on labour. as soon as i save up enough
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Having a top speed of 30km/h reving is a pain in the ass when you are going from track to track etc. You have to stop change back to high then back to low and I drive an auto.j-top paj wrote:why is it too low? cant u just use a higher gear instead? like use 3rd instead of 1st?
I also see it as a waste of 2 gears if your never using first or second when you could have 43% and get use of all gears and if you need low range on the beach you can.
An example
I've never really used low range much in mine on the beach that much but I did have to tow a buggy on a car trailer off Stockton beach a couple of times and if I had of had 83% reduction at the time I wouldn't have been able to use low range which would have met I couldn't have towed the stuffed buggy off the beach and that is with 37s.
Cheers Mick.
as mick said 4.88 diffs n 85% gears is to low with 37", with turbo td42 n 35" there is not much need for any reduction so why do you need to reduce low by 85% to go to 37".
With 4.88 diffs n 37" my ute drove fine, when I fitted the marks gears it was to low never used 1 n 2.
Try driving a loose hill climb say 35 to 45 degree incline that is 50m to 100m long with real low gearing n see how far you get before you run out of revs, I would even consider the 27% gears for 37"tyres n run 4.6 diffs you only need enough reduction to take the load off clutch n let the motot work near idle
Just my opinion all depends on your driving style
With 4.88 diffs n 37" my ute drove fine, when I fitted the marks gears it was to low never used 1 n 2.
Try driving a loose hill climb say 35 to 45 degree incline that is 50m to 100m long with real low gearing n see how far you get before you run out of revs, I would even consider the 27% gears for 37"tyres n run 4.6 diffs you only need enough reduction to take the load off clutch n let the motot work near idle
Just my opinion all depends on your driving style
So what's your advise for someone running standard transfer gears and 4.1's with 37's. Better to go 85% and leave the 4.1 diffs (turbo diesel so goes ok most times but can be a little sluggish up big hills) or should I replace diff gears and go 43%? Obviously the latter is more expensive, so is it worth the extra expense?
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
now i know who u are.... i rememeber that buildupMick. wrote:I'm guessing your haven't seen my truck.j-top paj wrote:im guessing u dont do much rock crawling?
Yes I do and the 83% reduction gears work well with my 42s on but rockcrawling with the 37s the 83% is overkill.
Cheers Mick.
hows the auto with it? mine is manual so thats why i need the lower gears. the tracks i drive im constantly on the clutch
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
The auto is brillant when i'm running the 42s but when I was running the 37s it was changing gears heaps which was worrying me a bit bacause the autos are worth about $3000 to replace.j-top paj wrote:now i know who u are.... i rememeber that buildupMick. wrote:I'm guessing your haven't seen my truck.j-top paj wrote:im guessing u dont do much rock crawling?
Yes I do and the 83% reduction gears work well with my 42s on but rockcrawling with the 37s the 83% is overkill.
Cheers Mick.
hows the auto with it? mine is manual so thats why i need the lower gears. the tracks i drive im constantly on the clutch
With the 42s on I can go down a steep hill take my foot off the trottle and it will almost come to a stop if I lock it in first.
So you can imagine how low it feels with the 37s on. If possable you should try and find someone with reduction gears in a patrol like your one and take it for a spin and see what you think. Your not around the Newcastle area are you or you don't happen to be going to tufftrucks?
Cheers Mick.
you still have to grind to fit the 43%, not sure if its as much as 85%. not hard to do though. For what its worth if you're not absolutely confident and got the correct tools THEN GET SOMEBODY WHO DOES THEM, TO FIT. Heaps of heavy hard work. This is from a part time back yard, hack mechanic point of view.
Who is online
Users browsing this forum: No registered users and 1 guest