Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Age of engine for conversion

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Age of engine for conversion

Post by rixrunner »

I have been told that when doing an engine conversion the donor engine must be newer than the car to be legal unless you run it on straight gas.

I believe this is an emissions thing and it is so the emissions are the same or better than before.

Can anyone confirm if this is correct in NSW ? Could I get an older model engine than my 94 model car engineered ?



Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: Age of engine for conversion

Post by Tiny »

rixrunner wrote:I have been told that when doing an engine conversion the donor engine must be newer than the car to be legal unless you run it on straight gas.

I believe this is an emissions thing and it is so the emissions are the same or better than before.

Can anyone confirm if this is correct in NSW ? Could I get an older model engine than my 94 model car engineered ?



Ricky
not quite, the engine must comply wioth the polutuon requirements of the year of manafacture of the vehicles the engine will be fitted to
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

Thanks Tiny.

So I take it that means I do not need to be concerned with the age of a Lexus V8 I might purchase to put in my 94 runner.



Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

rixrunner wrote:Thanks Tiny.

So I take it that means I do not need to be concerned with the age of a Lexus V8 I might purchase to put in my 94 runner.



Ricky
as I unbderstand it nop, but you will need the polution gear form a newer model if there was changes etc, best to talk to an engineer as to what they will want
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

Will do... thanks again.


Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

rixrunner wrote:Will do... thanks again.


Ricky
no probs, if brookvale is closr for you give john at consulmotive a call, he is pretty good, has dome alot of 4wdrives and has had a lot to do with streeters as well, used to have a collum in one of the v8 street machine mags
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

From my understanding, here in VIc the motor has to be of the same vintage or newer to comply with EPA stuff, or it has to be put on gas. I found this out while trying to put an older V8 into a later model E-series Falcon.

Coxy
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

From my understanding, here in VIc the motor has to be of the same vintage or newer to comply with EPA stuff, or it has to be put on gas. I found this out while trying to put an older V8 into a later model E-series Falcon.

Coxy
almost :D

motor can be from any era.... providing it comply's to the relevant ADR's of your car and the % of hydro carbons (EPA test) isnt any higher than your car in its original condition

older motor = more emmissions = straight gas to pass :D
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

This is the Vic EPA Modified Vehicle Guidelines 2006.

http://epanote2.epa.vic.gov.au/EPA/Publ ... E/1031.pdf

There is probably something similar available for each State.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests