Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Heat SD33T

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

macca81 wrote:i just checked mine, seems i have 13 horizoltal bars across it, then i grabbed my fone to take a pic and i turned the light on(bloody fone has a betta light than my petzl tikka!! grrr) and saw what appeares to be a second radiator behind it with shitloads of these bars in it, one every cm rather than every 3 cm it seemed, if not moreso. is this a 2nd radiator or is my head jst makin fun of me again?


Imageya can see the smaller barred '2nd' rad just behind the bracket in the right side of the pic. (appologies for bad quality)

Uhmm, the front one is your oil cooler, the rear one your radiator...

*cough*
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

The front one is your AC condensor. An oil cooler would be smaller.

Oh and Patchy, I work at ford too, thats how i saw the rad lol. Its getting timing belts done.
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

awell there you go, I thought it was the oil cooler.. :) so its the ac condenser. :armsup:

Peace out
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

yeah my old man said the same, i dont have air con anymore tho :( it got removed long b4 i got the truck
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 362
Joined: Sat Jan 21, 2006 10:08 pm
Location: Northern Beaches Sydney

Post by k1barh »

macca81 wrote:
tilts wrote:i think k1barh has had his head off his for so long it may never run again. now he's killed the clutch :lol: what are mates for

wow you have that many cores?? :P am i the only one failing to see the heating problem in tilts post?? :D hehe

the heating problem caused me to crack the head on the patrol (that is what my good friend tilts is refering to) as for the clutch it sat that long that when i finally rectified the problem (including the over heating) it decided to finally let the clutch go as well, "what are mates for" pointing out your foibles thats what
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

dattopimp wrote:The front one is your AC condensor. An oil cooler would be smaller.

Oh and Patchy, I work at ford too, thats how i saw the rad lol. Its getting timing belts done.
then the thought of using an explorer for spares shouldnt have crossed your mind, let alone made it on this site...

ps. by the way it will be getting timing chains and tensoners replaced
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

chains yeah, thats the one, i thought it was then i thought...what kinda POS needs a timing chain to be replaced :roll: stupid question
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

anyone made anymore progress with their radiators at all? I'm suffering from major procrastination and havn't done a thing to my rig for a few weeks now, brought all this stuff and its just sitting there...One day i'll get my arse into gear.

Anyone gone any further with the oil cooler? still unsure where to put mine and where to plumb it in...
zen
Posts: 195
Joined: Sat Mar 04, 2006 7:45 am
Location: england

Post by zen »

my external oil cooler comes off the filter via a spin on adapter..from adapter goes to oil stat which only allows flow of oil to cooler once oil is over 90..oil cooler mounted infront of rad..has 13row cooler...

uses 20/50w oil (diesel high spec) changed every 2500miles. psi at tickover when hot 25psi..cold 50

as engine is fitted in range rover uses rangie rad..(recored by rad shop for £100) so is now 4/5 core(cant remember)

internal oil cooler cleaned of gunk..

twin kenlow elecy fans on rad..

garrett 2052s turbo.running 1 bar boost..cosworth (ex 4x4 sierra) intercooler front mounted..oddddddleeeeess of power NEVER (touch wood) gets hot..fans hardly ever come on ..
timing advanced a wee bit...
straight though 2.5in exhaust.
k&n filter mounted in original rangie filter canister holder being feed kool air via large tube from OUTSIDE engine bay..(snoorkle thgingy)



external oil cooler and recored rad made a large difference when on heavy load
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

mmm, and where would one get one of these spin on adapators from?
zen
Posts: 195
Joined: Sat Mar 04, 2006 7:45 am
Location: england

Post by zen »

well..dont know where in aus..but i know they are sold thoughout the world..and that is from mocal...
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

finally managed to get some photos and post them up!!

making up a few plates and buying some adaptors this setup has solved my heat problems.

Last week driving in 33 deg heat, the gauge sat just a little over the half way mark.

here are a few pics

http://i148.photobucket.com/albums/s34/ ... ure047.jpg
http://i148.photobucket.com/albums/s34/ ... ure050.jpg
http://i148.photobucket.com/albums/s34/ ... ure053.jpg
Posts: 148
Joined: Fri Dec 29, 2006 9:22 pm
Location: Melbourne

Post by juls »

dattopimp wrote:mmm, and where would one get one of these spin on adapators from?
http://www.vpw.com.au/productgroup.asp? ... GrpID=2757

Otherwise from autobarn or something but vpw have good prices imo.

Not sure how they fit the diesel filter though?



BTW pics no workie.
zen
Posts: 195
Joined: Sat Mar 04, 2006 7:45 am
Location: england

Post by zen »

ALSO..STRIP AND CLEAN YOUR WATER/OIL COOLER ON BLOCK..BET ITS HALF FULL OF CRAP..IE NOT WORKING!!
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests