Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.6 EFI into S111 landy

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 54
Joined: Sat Oct 04, 2003 4:32 pm
Location: Watagans

Contact:
Contact Gazzaj

3.6 EFI into S111 landy

Post by Gazzaj »

I`ve got a written commodore parked next to a S111 landy do you think this is worth attempting has it been done before
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

sounds like a smart conversion.
small, light powerfull, plenty of low down torque.

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

gearbox just won't take the torque continually. the lt 95 will.
if the v6 bolt pattern is the same as the v8 then adapters can be sourced from marks and crs.
:cool: :cool: :cool:
Top
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

maybe worth making an adaption useing the holden 5 speed onto the series transfer. nothing weak about the transfer box. there would only be some mounting to be moved for the engine. I think this woulb be an easy conversion. the diffs may not handle the snapy power of the v6, they tend to come on stong real quike

my 20 cents worth.

glen
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Re: 3.6 EFI into S111 landy

Post by Loanrangie »

Why not fit the holden auto as well ?
Gazzaj wrote:I`ve got a written commodore parked next to a S111 landy do you think this is worth attempting has it been done before
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 54
Joined: Sat Oct 04, 2003 4:32 pm
Location: Watagans

Contact:
Contact Gazzaj

Re: 3.6 EFI into S111 landy

Post by Gazzaj »

Loanrangie wrote:Why not fit the holden auto as well ?
Gazzaj wrote:I`ve got a written commodore parked next to a S111 landy do you think this is worth attempting has it been done before

yeh that `s what I`ve got the auto easier to fit than the manual and I`ll probably use Range rover rear diff and the ratios are pretty good to run 32`s with the Auto, I`m looking for a SWB roof to turn my wagon into a dual cab ute and use the holden seats front and rear.
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

that sounds like a project!!!
the t700 auto has the lowest 1st. gear available in an auto- sweet!
if its a lwb then maybe run gq diffs
the front centre is drivers side, perfect. the rear is centre, but because of your wheelbase its ok to run drivers side to centre tailshaft
stronger diffs,cv's,axles,diskbrakes and gearing to run 33's or larger!
:cool: :cool: :cool:
Top
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

fit the t700 with the cruiser (think i used a 45 series) transfer i used the marks adapter do a 2" body lift and you dont have to cut the fire wall it makes an awrsome series landy
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

body lift in a series landy is a real pita!
maybe move the whole drivetrain foward, since the driveshafts will be custom anyway. :roll: :roll:
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests