Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Marks 4wd Adaptors.Group buy

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Marks 4wd Adaptors.Group buy

Post by thunder »

Im putting this up to see if there would be enough interest from people to buy transfer gears.
please post if you are genuinely keen to buy.
I emailed marks and got this reply.

Thankyou for your inquiry.
Yes we can certainly offer you a discount on a quantity of our
Gearmaster Gears.
For me to price this up for you, I will need to know what sort of
quantity you are looking at.
Please let me know when convenient, and I will do my best to get you the
best possible price.

Look forward to hearing from you Steve.

Regards,
Danielle French.
Manager.
Last edited by thunder on Fri Apr 13, 2007 5:33 pm, edited 2 times in total.
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

will

Post by tuf045 »

will they all have to be the same ratio? and to suit the same vechiles as in 5 hilux 5 gq gu? will they do 2?% 4?% & 83% in the gq gu ones our do they have to be all the same ratio?
Reptile fabrication.
www.agroautomotive.net
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Re: will

Post by thunder »

tuf045 wrote:will they all have to be the same ratio? and to suit the same vechiles as in 5 hilux 5 gq gu? will they do 2?% 4?% & 83% in the gq gu ones our do they have to be all the same ratio?
Ive just sent an email to ask that Question.My 1st email to them was a general Question on a cheaper price on transfer gears.I didnt ask for any 1 gear
as it stands
thunder(Gu 43%)
mate (hilux %?)
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

I'd be interested depending on price. The GQ could do with some gearing.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

yep, I could be interested pending more info re price. (60 series)
Posts: 166
Joined: Wed Apr 27, 2005 9:36 pm
Location: Gold Coast

Post by scout392 »

Dana 20 ???

What sort of $$$

Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

I could be interested depending on price and more info. 73/5 series cruiser.
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

Me to if the price is alot lower then $1800 I would consider it I have pic out option 4 thanks. Toyo split case
Mike
LETS GO BRONCOS
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

yep interested 43% GQ
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

Yeah i would be also price dependent ofcourse.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 11
Joined: Tue Dec 06, 2005 5:50 am
Location: tasmania

Post by botty »

would be interested GU43%
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Re: will

Post by thunder »

thunder wrote:
tuf045 wrote:will they all have to be the same ratio? and to suit the same vechiles as in 5 hilux 5 gq gu? will they do 2?% 4?% & 83% in the gq gu ones our do they have to be all the same ratio?
Ive just sent an email to ask that Question.My 1st email to them was a general Question on a cheaper price on transfer gears.I didnt ask for any 1 gear
as it stands
thunder(Gu 43%)
mate (hilux %?)
i emailed as below

Hi Steve,
Different ratios are fine.
Let me know of quantities when you can and I will then price it up for you.

Regards,
Danielle

steve wrote:

> hi.Some one has asked me if they commit to buy gears ..will we all
> have to get the same ratio
>
> Me..patrol
> mate has a hilix
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

this is the marks website
http://www.marks4wd.com/

there are prices on there and to see if they have what you want.

ill keep this up for a week so if you could put up weather you are 100% or not so after a week i can give her a number that are definate so we can get a price.
for me im getting gears regardless.
if cash is a problem we can ask to pay by end of april if you like.(or may)

ok something tiny has changed. :D
TINY will do it through his company to marks as he has dealt with them before and hes done group buys b4.


if cash is a problem we can ask to pay by end of april if you like.(or may)
Last edited by thunder on Mon Mar 26, 2007 8:36 pm, edited 1 time in total.
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

im 99% in depending on price and when we are purchasing... if i got enough time to get the funds then im 100%
also spoke to mousie at tuff truck and hes keen to depending on price
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

ok guys, letgs get an idea of numbers etc, anything people want to buy from marks in one hit, anyone needs an engine coversion kit to a speedo adaptor to diff gears, the more stuff we get in one hit the better the price should be, will get them to run through a compete quote when I have models \ numbers etc, will run it through the business and you can pay me direct, I will want a deposit minimum on ordereing and then full payment before they ship, the thing with group buys is getting one payment, one destination saves time, shipping, paperwork etc

feel free to post up here, pm me ot email me your requirements, by next monday morning.

pickup would be from hornsby, but I am sure we can arrange something if needed, if you are in brissy for eg I would be happy to post it on via aus post or pack and send at your cost

seeing I am going to run some bulk buys again pm if you want to run a bulk buy with something else

cheers

Tiny
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

bump :D
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1234
Joined: Fri Jul 08, 2005 9:56 am
Location: Bris-vagas, southside

Post by mattstar »

I could be perswaded for a set of 43%gu if the price is right
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Depending on price I will put my hand up for one of these. Would want to be a decent discount though.

PART NO. MFK1190BLTRS RRP AU$1725 inc GST
3.05:1 with 1:1 High Range, Gearmaster Tapered Roller Gears to suit 5-speed models 10/82 to 10/84 with a 34mm diameter idler shaft.
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

any news?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

Tiny wrote:ok guys, letgs get an idea of numbers etc, anything people want to buy from marks in one hit, anyone needs an engine coversion kit to a speedo adaptor to diff gears, the more stuff we get in one hit the better the price should be, will get them to run through a compete quote when I have models \ numbers etc, will run it through the business and you can pay me direct, I will want a deposit minimum on ordereing and then full payment before they ship, the thing with group buys is getting one payment, one destination saves time, shipping, paperwork etc

feel free to post up here, pm me ot email me your requirements, by next monday morning.

pickup would be from hornsby, but I am sure we can arrange something if needed, if you are in brissy for eg I would be happy to post it on via aus post or pack and send at your cost

seeing I am going to run some bulk buys again pm if you want to run a bulk buy with something else

cheers

Tiny
just got to post on here by monday morning so tiny can organise
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

gu 43% reduction
mates hilux is Part number is,m f k 1250/4 is 75%
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

One more possibility for GQ if price is right.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

I thought there'd be more interest in this. Doesnt seem to be enough numbers to account for much of a discount.......unless this is listed on other forums also?
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Post by thunder »

RAY185 wrote:I thought there'd be more interest in this. Doesnt seem to be enough numbers to account for much of a discount.......unless this is listed on other forums also?
ive just pmd tiny to ask that question about other forums and leave this up for longer as it seems a few people are not sure at the moment weather they want stuff or not.it is a lot of money and maybe people need more time to commit to this

i got gears in i think 2002 through a group buy with the partrol list and
back then they were $990 to my door(guessing)so its not a massive saving but every little bit helps
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bump

monday next week regardless of number
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

Post by bucketofbolts »

yeah im keen on 83% gears for a GQ,

as most people have said, depending on price,

also after a price on a dual transfer adapter for a GQ,

would be one or the other

cheerss ray
bucketofbolts is sold, :(
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

should know prices 2moz
If the above post did not offend you in any way please PM me so I can try harder!!
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

total comes to 18 sets of gears, adaptors and a split case
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 353
Joined: Sun Jun 27, 2004 9:50 pm
Location: Perth, Western Australia

Post by South »

I think it would have been easier to more people to commit if it had of been like.

10% discount on 5 units
15% on 10 units
20% on 15 units

That way people could have said well RRP is XYZ, but i will then be able to get it for ABC... I know I wont commit to anything without first knowing the price.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

South wrote:I think it would have been easier to more people to commit if it had of been like.

10% discount on 5 units
15% on 10 units
20% on 15 units

That way people could have said well RRP is XYZ, but i will then be able to get it for ABC... I know I wont commit to anything without first knowing the price.
I have committed to buying a set DEPENDING on price, nothing more. Numbers were needed for people seriously considering buying gears to obtain a QUOTE. No obligation to buy if you dont like the price. Correct me if I'm wrong Tiny.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests