Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ecotec como motor into hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 47
Joined: Wed Mar 14, 2007 11:17 am

ecotec como motor into hilux

Post by 2.8D_Lux »

hi i was just wondering if its possible to put a ecotec insted of the vn motor and can i be mated to a hilux manual gearbox and transfercase.
Top
Posts: 916
Joined: Tue Jul 27, 2004 2:33 pm
Location: Engadine, Sydney

Post by searsy989 »

I've seen one before in a Hilux out where i live. Don't know anything about it except it had one.
The machine is now alive...
Top
Posts: 36
Joined: Thu Jan 25, 2007 7:23 pm
Location: D'aguliar- in the shed up on blocks!

v6

Post by tuff-lux »

yeah mate marks adapters do a kit.
83 lux
Top
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

Post by Timmeh »

yeah mact can to it no worries, mark's adapters will look after you with the parts required! But if you are thinking of keeping the manual box, get a different one, because it won't hold up to the power. this conversion in reasonably eaisy to do

Timmeh
Redline is made for a reason!!
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

My brother picks his up this Sunday from CRS. Fitted with Ecotec.
Last edited by BowTieGQ on Fri Mar 30, 2007 7:59 pm, edited 1 time in total.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

My brother picks his up this Sunday from CRS. Fitted with Ecotec.
Sorry for double post, Windows locked up!!!!!!!!!
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Grab yourself an r151f gearbox out of a surf, 79/78/100 series 1hz motored landcruiser, 90/120 series prado or later model turbo diesel hilux. This will be strong enough to handle the ecotec motor, or keep the TH700 auto box and adapt a gear driven transfer case off the back, once again marks/dellows make adapters...
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Now I'm a V8 man but a while ago I went for a fang in a car that ran a 3.8 V6 punched out to 4.8 & had a turbo sitting on the side, it was running an aftermarket comp & a bit of custom head work etc, all this added up to one hell of a ride :cool: . Saw it dynoed and the numbers blew me away this thing had gobs of torque too.
It's got me thinking that a compact & light motor with 350+kw might go well in a 4by.
I'm tipping it's not going to cheap though.
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

yeah there was a artical in street machine a while ago you can buy a kit of the shelf to stroke in to 4.1L and add a supercharger and you should have some decent torque i'll try find the figures soon.
plenty of parts on the bench
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

if you are best to change the g/box is there a manual box you can use rather than turbo 700?
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 134 guests