Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

couple of quick mq questions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

couple of quick mq questions

Post by macca81 »

as im only new to the whole patrol thing, im hopeing i could have a few things cleared up for me. one i found after disconecting my swaybar and finding my tires scrub a flap of metal that sits sortof over the back of the indicators, like it was cut out of the body to make room for them but rather than take it off the designers just bent it back abit...


Image
this badly drawn pic is what it looked like b4 i bent it out of the way... well sortof what it looked like....


Image
Image
this is an actual pic of it after i bent it. is it still there for a reason? or did they just get lazy and not cut it off (like i will when i can be bothered dragging out the 4-inch).



Image
the other thing is i found this bolt on the front of the chassie, facing backwards, only on left-hand side... anyone know what its for?
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

The bolt in the last pic should be where your steering dampener should be!

Regards,
g@z.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

if thats the case, using my incredible powers of decution and reasoning, that would mean i have no stearing dampener, altho would presume i once did?? hmmm interesting...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

yeah mate, thats where your steering damper goes.. get one..

the other flap/bent metal looks like has been ripped by tire scrubbing, and id weld back up if i were you. Or, someones modded the indicators into the bull bar itself and bent the metal out of the way. either way, they beloy on the body, not the bar... well they used to anyways.


cheers
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

the idicators are where they are ment to be, and the only reason the flaps are where they are now is because i got the multigrips to them, b4 they where curved ever so nicely, done all proper like, and just waiting to get attacked by wheels with flex...




does not having a damper actualy do anything bad to the handling?? seeing as i havnt driven it with one, and without it seems fine to me...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

dunno if it effects handeling, but will effect hitting rocks when off roading, and the steering wheel getting ripped out of your hands.

Your wheels rub on those plates? i find that rather strange, as iam running 32 inch simexs (more like 33 inch real) and they dont rub at all.
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

cut that bit of steel off, but bend an edge all the way around it so the remaining bits are still solid. Or better yed bend and attach e a bit of angle to it. Its not a real important bit of steel anyway

as for your steering, without the damper, you will feel more shock and vibes through the steering wheel. it will wobble alot more when it goes over uneven ground, and will jerk the steering more violently when you hit roskc and ruts offroad.

jEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

jessie928 wrote:cut that bit of steel off, but bend an edge all the way around it so the remaining bits are still solid. Or better yed bend and attach e a bit of angle to it. Its not a real important bit of steel anyway
jEs
Yeah its not real important...........

Its just there to stop rocks , sticks , or any other object that the front tyres can pickup and throw at the back of the plastic indicators thus shattering em into a few bits that can be superglued back together provided you know when the rock actually hit it and you stopped and picked up all the broken bits and in doing so saving yourself a few bucks from having to open an account with nissan for a regular supply of front left & right indicator assemblies

Nah ....... their not real important at all ;)






Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

generally, you wont have much of an issue forward of the wheel.
unless you drive 100km/h in reverse :D

if indeed that is a problem, its much easyer to bend up a small bit of sheet behind the indicator, like the tin plate that protect the 40 series rear lights.

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

well as i drive thumbs-out, and only occasionaly loose the steering wheel, i think ill save my $$ and live without a dampener.

as for the metal, its going.

vanne, im running 33's atm with sway bars disconected, if i re-connected them id have no probs, but i like that bit of extra flex :D i never knew the plates existed untill 2 days after disconecting them.
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

right tiome to hassle all again, pulled out most of my interior on the weekend and pulled out the carpet coz it looked shite, and after getting about 1/4 tonne worth of dirt out from under the vinel, i found this black 'box' think under the vinel under the drivers seat...
Image
Image
wtf is it for??? :?: :?:

umm yeah atm thats about all im curious about... BUT STAY TUNED! im sure to find somethin else on this bus i have no idea about, and it wont take long :D
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

looks like its only held on by a couple of screws. just take it off and have a look see.... if you were asking me i would say its perhaps a protective cover for a connector of somesort (but then i have no real idea!)
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

i did think about pulling it off, but was running outa daylight and needed to get to work then next day (havin the seat in helps for this :D ) so i just took a pic instead (yea i know, lazy basturd... but thats y i dont walk the fire trails :D )
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 336
Joined: Thu Aug 11, 2005 8:23 pm
Location: dromana, vic

Post by dromana7411 »

under that cover is part of your wiring loom....
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

dromana7411 wrote:under that cover is part of your wiring loom....
there you go a riveting and fullfilling answer you can sleep sound tonight :D
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

ho hum, i was hoping it would be slightly more exciting than that... i ges ill just have to go back to dreaming about those sexy women instead of the wonderfull possiblities that hide under that little black box... :(
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

or you could just dream about black box. :P
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

hehe this is tru ;)
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 45
Joined: Wed Oct 04, 2006 2:08 pm
Location: WA

Post by neRok »

yer there is just a hole/grommet in the floor the wiring goes through. some goes right to the gearbox and transfer case for the reverse/4wd switches and the rest goes left to the back for the lights im pretty sure.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

this is no longer just a couple of 'quick' questions i have decided :P

right this thing came with my bus, it was just sitting under the passenger seat, i assumed it was a spare air filter at a glance, but i have recently had a look at it and have changed my mind, tho im not sue just what it is tho...
Image
Image
and this little bit is a piece of rubber that looks like it could work as a kinda one-way valve or something ?? :? Image



then there is this button just next to the steering collum, when i press it the injection pump control mech moves, but it will neither start the engine, nore will it kill it (thort to start with it mite be a kill switch...)
can anyone shed some light please??:D
Image
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 160
Joined: Sat Jul 01, 2006 8:03 pm

Post by bigbennymq »

macca81 wrote:this is no longer just a couple of 'quick' questions i have decided :P

right this thing came with my bus, it was just sitting under the passenger seat, i assumed it was a spare air filter at a glance, but i have recently had a look at it and have changed my mind, tho im not sue just what it is tho...
Image
Image
and this little bit is a piece of rubber that looks like it could work as a kinda one-way valve or something ?? :? Image



then there is this button just next to the steering collum, when i press it the injection pump control mech moves, but it will neither start the engine, nore will it kill it (thort to start with it mite be a kill switch...)
can anyone shed some light please??:D
Image

the first pic i think is the bottom of the pre air filter it just clips and screws on
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

camp oven?
Posts: 1234
Joined: Fri Jul 08, 2005 9:56 am
Location: Bris-vagas, southside

Post by mattstar »

Good call on the pre filter, that is definatly the bottem half of a pre filter, dould be the top half, does it have a oval sort of shape cut out on one side?
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

anyone know what size intercooler core best suits the sd33t engine :?:

is it ok just to use your precleaner as the only filter :?:
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

yeah it should be fine to run just the pre cleaner, lots of people only run it and makes it easier to seal it up good when you run a snorkel.

The pre filter is just a normal air filter just make sure you keep it clean, But that goes with out saying
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

just as i thought, was just curious.... i will only run the precleaner once i get an intercooler for the old girl, just not sure what size to run and how much to up the boost to compinsate for the lost pressure by running an intercooler
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

mattstar wrote:Good call on the pre filter, that is definatly the bottem half of a pre filter, dould be the top half, does it have a oval sort of shape cut out on one side?
nope, just nice and round all around it like in the pic...




ne ideas on the button??
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 160
Joined: Sat Jul 01, 2006 8:03 pm

Post by bigbennymq »

might be a button to pump diesel fuel in the enigne like on the nissan/datsun work trucks the old ones/ just trace what eva comes out the back of the button to where it leads
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

as i said, to the injection pump control mech...

turning the key pushes diesel to the engine already, so y have a button that pumps it aswel?


when driving and pushing the button its like the engine is killed for about a tenth of a sec b4 continuing on its merry way...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

lada;s have the same thing on the fuel pump it primes the fuel on freezing cold mornings or nights eg the snow
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests