Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diesel gurus please help! very confused!!!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 94
Joined: Fri Sep 16, 2005 5:11 pm
Location: S.E.Qld.

Post by Gruntahunta »

Yeah, a lot cheaper than a fry up i guess!!!.................Pete! :D
Artificial Intelligence is no match for Natural Stupidity!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

For that money, id be intercooling it and tuning to that....gq's run 14 psi with the safari cooler :)
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

beretta wrote:
Gruntahunta wrote:Thanks guys, jeez they don't miss ya do they! Expensive little suckers....................Pete! :shock:
Yeah but worth it to know how hot it's gettin.
I agree with beretta here.. yes gauge is a few bux, but about 1/30th the cost of an engine rebuild - cheap insurance. Had VDO in GQ, and without waitin, went for VDO in GU too... dont buy cheap shit, or you may as well not buy anything
Last edited by bogged on Sun Apr 22, 2007 9:34 pm, edited 1 time in total.
Top
Posts: 93
Joined: Fri Jul 28, 2006 11:17 pm
Location: melbourne

Post by full-boost »

try here
http://www.thermoguard.com.au/
they have a digital reading, they are also looking at making a pyro/boostgauge, all in one.
friends have their pyro and swear by it!!!!!
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

We use vdo gauges. Temps pre turbo should be no higher than 700c.

We tried my n/a td42 on the dyno with a egt guage in the manifold, it went to 790c and stayed there under full load at 100kmh. It took about 3-4 mins to get that.

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 52 guests