Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extended Brake Lines

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Extended Brake Lines

Post by Lux_89 »

Hey guys ,
Just wondering if any no's where i can get a hold of extended brake lines in brizzy for cheaper than superior n snake r ect. If any one has any they dont want aswell let me no and we can talk $ i have a solid axle hilux. Thanks guys ;)
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Figure out what length you need, then ring some brake joints and ask if they make lines. Most specialist brake joints can make flexible lines.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Thanks m8, im gonna try that A.B.S joint.. they seem alright and make up lines too. Thanks for the pointer m8.
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Let us know how much they want for the job - i need a few custom flexies made up too.
Tetanus rolling on 37's
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

slacks creek brake and clutch charged me $44 each for 600mm long ones with special ends so i could go straight into the caliper
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 110
Joined: Sun Jul 02, 2006 11:53 am
Location: aus/qld/brisbane/bray park

Post by sjjenkin »

mate i will never deal with abs again they are rude sometimes and always charge you more if you are young. and if your car is a little suspect they wont let you leave with your car :bad-words: my mate on here mr. smith almost had a wheel fall of after they had serviced a hub and didnt tighten the bolts enouf. but thats just my point of view i had one made up and put it on myself from abs.
you should only be stuck if your on ur roof

eat some concrete and harden the hell up
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

Don Kyatt at Seven Hills in Sydney charged me $31.80 each for 100mm longer then standard. They would probably mail order too.
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Oh really.. .what a bunch of pricks. Not dealing with them in that case. Ill be fitting them myself, wont go caliper direct, will leave the steel hose there.. Slacks creek will be a goa for that money. Dogbreath ill let ya no m8, just the other day, fitted the suspension outa the roll into the new lux, and the lines are longer on the others... got to 1/2 droop and nearly lost a line. Went up the back but the old ones are shagged so ill just go new ones. Thanks for the help boys, take care!
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Since you are getting new lines, get them in braided.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

MKPatrolGuy wrote:Since you are getting new lines, get them in braided.
Just make sure that if you go braided they are ADR approved, as not all braided lines are legal for road use.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Agreed. But while I've been shopping around for some, I've found ads that say ADR approved and others that say DOT approved. Is this just wording or is there a variation? Who does some in Vic too? I can't find anyone here as cheap as the prices above. They're all about $70 each or more.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I got quoted "about $35" per custom line (rubber) at Advanced Brake & Clutch Service in Croydon. Sounds reasonable to me.

-Stu :)
Tetanus rolling on 37's
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Sorry, my bad. I was meaning braided.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 405
Joined: Tue Feb 08, 2005 1:35 pm
Location: East Kurrajong NSW

Post by CV Smasher »

MKPatrolGuy wrote:Since you are getting new lines, get them in braided.
Agreed with the rubber extended ones you lose your feel and eventually preasure as the lines expand.
I put braided ones on the front of my lux and it improved the breaking 100%.
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

My Engineer told me in no uncertain terms DO NOT USE BRAIDED brakelines.

Not sure but I got the impression it was because they were not legal.... he would not pass them anyway.


Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Posts: 405
Joined: Tue Feb 08, 2005 1:35 pm
Location: East Kurrajong NSW

Post by CV Smasher »

rixrunner wrote:My Engineer told me in no uncertain terms DO NOT USE BRAIDED brakelines.

Not sure but I got the impression it was because they were not legal.... he would not pass them anyway.


Ricky
How long ago was that?

I think the street legal ones have only been around for a year or so.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

CV Smasher wrote:
rixrunner wrote:My Engineer told me in no uncertain terms DO NOT USE BRAIDED brakelines.

Not sure but I got the impression it was because they were not legal.... he would not pass them anyway.


Ricky
How long ago was that?

I think the street legal ones have only been around for a year or so.

Ii think your right bout that.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

rixrunner wrote:My Engineer told me in no uncertain terms DO NOT USE BRAIDED brakelines.

Not sure but I got the impression it was because they were not legal.... he would not pass them anyway.


Ricky
Provided they have ADR 07/00 marked on the hose they should be perfectly legal, even rubber lines need to have this number visible somewhere.

I would find another engineer with a brain.
\m/
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

CV Smasher wrote:
How long ago was that?

I think the street legal ones have only been around for a year or so.
Less than 2 weeks ago.


Gribble wrote:

Provided they have ADR 07/00 marked on the hose they should be perfectly legal, even rubber lines need to have this number visible somewhere.

I would find another engineer with a brain.

Naaa.... won't be finding another, I am confident he will look after me ;) .

However I will quiz him on why he says no braided next time I see him.


Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

Sorry for the hijack! But does anyone know who in brisbane does Braided lines?
Thinking about puting some up front at the calipers!!!

Cheers
JB
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Post by Potter »

Off topic PMSL at Gribbles Avatar
Posts: 37
Joined: Mon Jun 05, 2006 8:27 pm
Location: Warner

Post by Mr.Smith »

definatly don't go to ABS (especially @ brendale)
as sjjenkin mentioned ABS serviced a wheel hub and failed to tighten the wheel bearing nut enough which caused my wheel to nearly come off, luckily the brake caliper held it on long enough for me to slow down from 100k/ph

but yeah i will never be going back there again!!
TD42, Turbo Intercooled LWB GQ patrol
3" EFS lift, 33' muddies, dual batt system, custom dents
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

Caboolture exhausts does rubber and braided in all sorts off colours if thats your fancy. They are all approved lines and tested to 3000psi and stamped with there approvel number.
2 weeks ago i had them do up 6 lines in total with all sorts of diffrent fittings for a mates buggy as we have gone full braided lines everywhere on it as so not to fark around with steel line anywhere. In total there was 13 metres of lines and came to a total of $480.00. They were done in about 3 hours. Great service and a top bunch of blokes and if the right person is in they can do them on the spot for you. I most certainly would send anybody who askes to them :!:
You will get them on 07 54956511
Cheers Jamie
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

dogbreath_48 wrote:I got quoted "about $35" per custom line (rubber) at Advanced Brake & Clutch Service in Croydon. Sounds reasonable to me.

-Stu :)
My ADR approved braided lines from here cost about $45 each.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

Potter wrote:Off topic PMSL at Gribbles Avatar
:D
\m/
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Cheers Stu, I'll give them a ring.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest