Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Headlight combo switch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

GQ Headlight combo switch

Post by rOd »

Has anyone bought a new Headlight Combination Switch (AKA headlight stalk) for a GQ.

Just wondering what Ni$$an will charge for a new one.

Mine has been playing up for a while now. Ive pulled it out, cleaned and fiddled with the contacts so many times because the DS headlight would intermittently work.
Now its begining to light the DS headlight when I use the blinkers. :roll:

I found one at the wreckers but it looked worse than what I currently have so I didnt get it.

Rod
Dont expect mere proof to sway my opinion.
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

most range from $150-$300 im not sure on patrol havent fitted one yet.
unless you pay stuff all for a 2nd hand one,( which in most cases wreakers charge an arm and leg for it) your wasting your time as youll probly only get 12 months out of it if your lucky
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Mine was playing up about 18mths ago. I took it off and pulled it apart as much as i could and sprayed about half a can of WD40 through it a couple of times. Dryed her up and she's worked beautifully ever since.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

GQ Bear wrote:Mine was playing up about 18mths ago. I took it off and pulled it apart as much as i could and sprayed about half a can of WD40 through it a couple of times. Dryed her up and she's worked beautifully ever since.
Yeah, I think Ive exhausted the spray it to buggery trick this time. :oops:
Dont expect mere proof to sway my opinion.
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

think I payed around $120 for mine. But there was a discussion on this about 6mths ago. And I was wondering if a stalk off a Pulsar might also fit. As these can be had from pick a part for probably 10bucks.
THOUGHT FOR THE DAY....
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

i just got one from the local wrecker when I had issues changing to high beam! Unable remember the price so it would've been less than $30
All sweet now!
this was just the indicator stalk and attached block thingy! :D
Cheers
JB
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

The old man's Navara's parkers used to come on all by themselves because of the switch in stalk stuffed. I forget the dollars but it was very cheap for Nissan and it looked exactly like a GQ one. I made a mental note that it's the same because it was so cheap.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

I believe that pulsar's use the same setup, you could find one of them at the wreckers, I used a pulsar unit in mine cause i came with an ajustable intermitted wiper switch.
Hoppy
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

had similar problem was a broken earth wire on rhs head lite just fixed it. Head light would go out n high beam indicator would come on
Posts: 447
Joined: Mon Dec 15, 2003 8:44 am
Location: Townsville

Post by BigMav »

Mine wouldn't dip back to low beam after you had been on high beam. Replaced the switch with a second hand one about 4 years ago for about $100 and no probs since. Just try and find one out of a later model rig or as has been said the pulsar may be cheaper.
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
Posts: 116
Joined: Sat May 14, 2005 11:55 am
Location: Murrumba Downs, Queensland

Post by dazzsbuggy »

turps wrote:think I payed around $120 for mine. But there was a discussion on this about 6mths ago. And I was wondering if a stalk off a Pulsar might also fit. As these can be had from pick a part for probably 10bucks.
yes mate a n13 pulsar is the same as patrol and the wiper will fit to
gq lwb 35 inc tyers 7inc lift kit
Posts: 73
Joined: Mon May 23, 2005 9:56 pm

headllight stalk

Post by mgundle »

you can buy brand new combo switchs aftermarket type from bursons for about $$120 and Geniune for about $170
both are good quality
i wouldnt even bother with secondhand
pulsar ones and r31 skyline ones are all the same
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Re: headllight stalk

Post by rOd »

mgundle wrote:you can buy brand new combo switchs aftermarket type from bursons for about $$120 and Geniune for about $170
both are good quality
i wouldnt even bother with secondhand
pulsar ones and r31 skyline ones are all the same
Thanks mate.

Im not a fan of second hand auto elctrical stuff either.
Dont expect mere proof to sway my opinion.
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

$96 from Kloster Nissan NewCastle :D :D :D :D :D :D
innovation is better, better is faster, and fast is all that counts
Posts: 789
Joined: Wed Aug 24, 2005 4:13 pm
Location: ACT

Post by CanberraMav »

N13 pulsar is definetly the same.

The skline one looks physically the same but the plug is different. I got caught out with this when someone off this forum said the skyline ones fit.

I got charged $40 for one here in Canberra.

As mentioned........give it a good hit with WD40. It might clean up the contacts a bit.
Mud_runner_GQ says:
I need 1.6 metre long shocks
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

90's model pathfinder are the same
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Posts: 158
Joined: Fri Feb 16, 2007 9:40 pm
Location: Brissy

Post by ROGQ »

your better off just going to nissan and buying a new one. $110 dollars ish form memory. I had this same problem. went and got one from the wreckers and same deal... so ended up going to nissan and the guy told me this is a comman fault on all nissans!!! they just end up getting worse and evantully one of ur headlights will be stuck on 24/7...
Posts: 49
Joined: Tue May 03, 2005 10:33 am
Location: Sydney, Liverpool

Post by SiNH »

Is this a DIY job? will I just require a set of screw drivers and some pliers or will there be soldering and cutting wires involved?
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: GQ Headlight combo switch

Post by chimpboy »

rOd wrote:Has anyone bought a new Headlight Combination Switch (AKA headlight stalk) for a GQ.

Just wondering what Ni$$an will charge for a new one.

Mine has been playing up for a while now. Ive pulled it out, cleaned and fiddled with the contacts so many times because the DS headlight would intermittently work.
Now its begining to light the DS headlight when I use the blinkers. :roll:

I found one at the wreckers but it looked worse than what I currently have so I didnt get it.

Rod
Just the driver's side? Interesting, I thought the switch would operate both sides jointly so it sounds a little odd.

Anyway, another reason to upgrade to a relay set-up before your switch shiats itself... if that's what it is.
This is not legal advice.
Posts: 2311
Joined: Fri Sep 09, 2005 11:08 am
Location: Bendigo

Post by kirragc »

Agree with Chimp
Switch mught even be alright for low load through a relay.
Il bet you are running 100w Halogens
What, haven't you ever done lines of International Roast off a hookers back with $100 notes?
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

SiNH wrote:Is this a DIY job? will I just require a set of screw drivers and some pliers or will there be soldering and cutting wires involved?
ooppss

no cutting or soldering required!
just a couple of screws, and unplug!
Easy DIY!

cheers
JB
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Re: GQ Headlight combo switch

Post by rOd »

chimpboy wrote:
rOd wrote:Has anyone bought a new Headlight Combination Switch (AKA headlight stalk) for a GQ.

Just wondering what Ni$$an will charge for a new one.

Mine has been playing up for a while now. Ive pulled it out, cleaned and fiddled with the contacts so many times because the DS headlight would intermittently work.
Now its begining to light the DS headlight when I use the blinkers. :roll:

I found one at the wreckers but it looked worse than what I currently have so I didnt get it.

Rod
Just the driver's side? Interesting, I thought the switch would operate both sides jointly so it sounds a little odd.

Anyway, another reason to upgrade to a relay set-up before your switch shiats itself... if that's what it is.
The switch does operate both sides jointly. But each side has its own contact. So in my case the driverside was the one playing up.

Anyway Ive fixed the problem by selling the car. :D
Dont expect mere proof to sway my opinion.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

nissan, so much interchange with other models :cool:
hands and mums dont count!!!
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

bj on roids wrote:nissan, so much interchange with other models :cool:
This is so true. Just wish they made a horn for the patrol then used it in a pulsar. Not the other way round.
THOUGHT FOR THE DAY....
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

When i flick my highbeams on with spotties on they come on instantly but are delayed in turning off when flicked off. Would this be combo or relay fault?? Just started happening a couple of weeks ago.

Might have to find a pulsar switch, and i beleive steering wheels fit perfect too??
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Posts: 789
Joined: Wed Aug 24, 2005 4:13 pm
Location: ACT

Post by CanberraMav »

Thats exactly what mine was doing and it was the switch.

Eventually wouldnt turn off at all.
Mud_runner_GQ says:
I need 1.6 metre long shocks
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

bj on roids wrote:nissan, so much interchange with other models :cool:
We had a '89 Holden Astra and a '90 Ford Maverick and both used the same Nissan part. :D
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 49
Joined: Tue May 03, 2005 10:33 am
Location: Sydney, Liverpool

Post by SiNH »

JWB wrote:
SiNH wrote:Is this a DIY job? will I just require a set of screw drivers and some pliers or will there be soldering and cutting wires involved?
ooppss

no cutting or soldering required!
just a couple of screws, and unplug!
Easy DIY!

cheers
Thank you for all your help guys, saved me a bucket load of cash if I went into Nissan and gotten them to source and fit my indicator stalk.

I ordered the part from Nissan spares for $130. It took me under 10mins to install, it was just a simple proccess unscrewing then unclipping the connections and then vice versa.

Alot cheaper than taking her in for this job ehs?

Nissan wanted to charge me $500 to replace the fluids in my drive train WTF!!!!, I can only imagine how much they would have charged to supply and fit the light combo switch.
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests