Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brake upgrade

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 147
Joined: Wed Feb 01, 2006 2:19 pm
Location: Brisbane

Brake upgrade

Post by Hally »

Has anyone done a brake upgrade on a defender 110 eg aftermarket calipers slotted rotors? mine dosent seem to stop as well as it used to maybe the v8 and 36tyres has something to do with it plus I would like to get them upgraded before the blower goes on
defender 110,4.6,auto,36simex,maxidrive everything. "JEEP" your right, I dont understand????
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

dose it have vented discs up front? if not try and get some later model Rangie or Disco calipers and run slotted vented discs... i run 35's Simex on my 93 rangie and it will pull up pretty quick if the roads not wet

Mick
TD5 96 Discovery UTE.
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

See if you can measure your caliper pistons.
There are two sizes, 41.3mm and (I think) 46mm.

If you've got the 41.3mm pistons, then a straightforward caliper swap will give you 25% more stopping power.

Vented rotors won't stop better when cold, but they will fade less when they get hot.
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

you do have 110 calipers and not rangie calipers?? (110 bigger, if they're solid discs, spacers can be used for vented option.)
like they said about vented, slows down fade, good for towing.
braided ss lines give better pedal feel and more direct brake pressure.
toorak tractor (VIC) have had 2 rover front ends with porsche rotors and larger calipers that fitted easily.
anthony johnson @ british 4wd (VIC) can do some sort of booster/master cyl. swap (disco s1??) that can help apparently.
hydroboost?? (very american ;)) look on pirate.
you can only fit so much inside a 15/16 inch wheel.
david
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

modman wrote:you do have 110 calipers and not rangie calipers?? (110 bigger, if they're solid discs, spacers can be used for vented option.)
It all depends on the year. Some 110's have the smaller pistons, some have larger.
The calipers are available for both vented and solid rotors (as you know the difference is a fitted spacer).
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

36" tyres would have a lot to do with it - the extra diameter requires the brakes to work a lot harder due to the extra leverage and the additional rolling mass
Posts: 147
Joined: Wed Feb 01, 2006 2:19 pm
Location: Brisbane

brake upgrade

Post by Hally »

Cheers mark was being a smart arse thanks for the info guys I remeber reading somewhere someone had used jag calipers ? the front axle is out of a vogue air susp rangie and I think the brakes are as well I'm not sure if the guys swaped them around they are vented but some days when I'm stop at set of traffic lights it looks like my car is on fire underneath there is a bit of smoke coming from them
defender 110,4.6,auto,36simex,maxidrive everything. "JEEP" your right, I dont understand????
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

110 calipers with vented rotors would be a good start then. ( slotted for the bling factor)
david
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

modman wrote:110 calipers with vented rotors would be a good start then. ( slotted for the bling factor)
david
Make sure you measure the pistons first.
One set of 110 calipers I almost bought turned out to have the small 41.3mm pistons.
Would have been a pointless swap.
Posts: 135
Joined: Sat Jan 11, 2003 4:20 pm
Location: NZ

Post by lowbox »

I put some EBC ones on the 90 - slotted/vented front, slotted rear. Improved the braking from poor to good, but then I found a faulty brake booster, replaced that which made the braking very very good.
Moral of the story, check your brakes are 100% first...
ct
Post Reply

Who is online

Users browsing this forum: No registered users and 36 guests