Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux offset rims ok to go onto gq?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

hilux offset rims ok to go onto gq?

Post by joelt »

i have a set of 15" rims with 31"s that i use on an IFS hilux and was wondering if they would be suitable for a gq? when i bought them, the dudes in the shop said they had to be a particular offset, what exactly, i don't know....does anyone know if they'd be suitable to go onto a gq? and how they are offset differently to other wheels?
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

Should be. IIRC, I think you'll find the Lux rims are bigger offset, but with 31's guards should still cover your tyres fine.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

I wouldn't be putting them on a GQ. The IFS Hilux generally run a P7 and GQ are N9. It will undertrack the vehicle and possibly foul on the tie rods.

Cheers,
Ryano
Hi!
Top
JUZ
Posts: 26
Joined: Sat Feb 11, 2006 3:12 pm
Location: Victoria, Melbourne

Post by JUZ »

also the hole for the hubs on toyota rims are a bit smaller than nissan ones. may not bolt on properly
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

True. Most of the 6/139.7 Sunnys out there have a 110mm Centre Bore. Only fairly old sunnys don't.
Alloys can be a different story. They're all different. American rims definitely need machining before they will fit but most others in the right fitment for GQ (offsets) already have the CB to suit. Once again old rims may be a different story.

Cheers,
Ryano
Hi!
Top
Posts: 192
Joined: Mon Jan 01, 2007 8:46 pm
Location: LOGAN

Post by DAV029 »

Ryano wrote:I wouldn't be putting them on a GQ. The IFS Hilux generally run a P7 and GQ are N9. It will undertrack the vehicle and possibly foul on the tie rods.

Cheers,
Ryano
x2
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests