HSVrangie

[cloughy]

How did you set up your jig for drilling out for the studs, to fit the lux centres in the rover housings? I've no intention of putting them in there near enough, as its not good enough....... Thanks

[HSV Rangie]

JAC MAC MADE IT.

Michael>

[cloughy]

Pics?? price?? wanna rent it , save me doing the math and making one

[HSV Rangie]

can use for free

I wil have in car next week.

where r u

Michael.

[cloughy]

Latrobe valley, ever come anywhere near the eastern suburbs for work, family, hallam penthouse

[HSV Rangie]

work in Dandenong

[cloughy]

Good stuff, i'll get in contact soon, ehen i can find a time to head down, gotta finish this gen 3 in my jag hopefully next days of, then hilux conversion on a disco, then supercharger on my rangie

What you drink??

[Loanrangie]

A hilux diff gasket works well for marking the holes.

[6.5 rangie]

Matt, if i ever make it down your way i can drop it in, i work around the corner from Michael, but as i said if i ever make it down your way

[cloughy]

A hilux diff gasket works well for marking the holes.

How do you get it true to the housing but??, you need to fix a jig throught the rover holes, then be able to drill the lux ones, preferably the jig having the correct size stud holes so you can run a drill through and not worry about it walking over the job

[cloughy]

Matt, if i ever make it down your way i can drop it in, i work around the corner from Michael, but as i said if i ever make it down your way

Shouldn't you be down this way on the 1st-3rd of june

[Loanrangie]

A hilux diff gasket works well for marking the holes.

How do you get it true to the housing but??, you need to fix a jig throught the rover holes, then be able to drill the lux ones, preferably the jig having the correct size stud holes so you can run a drill through and not worry about it walking over the job

I think from memory 1 or 2 of the rover studs line up with the lux centre holes. Michaels jig is a cut down centre so its much the same.

[cloughy]

A hilux diff gasket works well for marking the holes.

How do you get it true to the housing but??, you need to fix a jig throught the rover holes, then be able to drill the lux ones, preferably the jig having the correct size stud holes so you can run a drill through and not worry about it walking over the job

I think from memory 1 or 2 of the rover studs line up with the lux centre holes. Michaels jig is a cut down centre so its much the same.

If 2 studs align, not 1, i'll just make a jig out of a spare 3rd, anyone confirm??

[cloughy]

http://www.pirate4x4.com/forum/showthre ... 387&page=2

Doesn't look like it, have you done this conversion before, Loanrangie??

[6.5 rangie]

Matt, if i ever make it down your way i can drop it in, i work around the corner from Michael, but as i said if i ever make it down your way

Shouldn't you be down this way on the 1st-3rd of june

Are, yes i should, is that june 07 or 08?

[mickrangie]

Loanrangie and i helped Landy_man do the conversion cant remember if the holes lined up but we used a gasket as landyman had to return HSV's jig

[cloughy]

Matt, if i ever make it down your way i can drop it in, i work around the corner from Michael, but as i said if i ever make it down your way

Shouldn't you be down this way on the 1st-3rd of june

Are, yes i should, is that june 07 or 08?

07......................3007

[cloughy]

Loanrangie and i helped Landy_man do the conversion cant remember if the holes lined up but we used a gasket as landyman had to return HSV's jig

Yea, not keen to use a gasket, the car is used daily for work and i don't think he wants any failures

[6.5 rangie]

Matt, if i ever make it down your way i can drop it in, i work around the corner from Michael, but as i said if i ever make it down your way

Shouldn't you be down this way on the 1st-3rd of june

Are, yes i should, is that june 07 or 08?

07......................3007

S#!t i better pull a finger out then.

[mopar rangie]

Mat if ya got a 3rd carrier you can use that as a jig as it is or if ya lucky i may have time in my busy schedule to machine all the unwanted carrier off so all ya have left is a ring.should be easy to set the carrier bearings up in line with the wheel bearings spot on

[cloughy]

Mat if ya got a 3rd carrier you can use that as a jig as it is or if ya lucky i may have time in my busy schedule to machine all the unwanted carrier off so all ya have left is a ring.should be easy to set the carrier bearings up in line with the wheel bearings spot on

Won't work properly, would need to do the math and set it up in the mill to put pins in where the rover studs are meant to be for alignment

Don't need to mill the top off, that's what a 9" is for

Won't be easy to correctly align CORRECTLT unless using this method

Just put it on the list with thoses rear arms, tapered roller bearing conversion..............And when you gonna finish farking around so I can finish that loom for you 5l that I started 2 years ago

[6.5 rangie]

Fark the loom, get back to work on the taper roller conversion

[mopar rangie]

yeah its called using dial indicators to line up all the bearings.thats wheel bearings as well as the diff bearings.chances are the housing will be out of shape a bit.by doing it this way you can help to get things back to somewhere near where they should be at the same time.