Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spacing Control arms forward

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 8
Joined: Sat Jun 17, 2006 7:12 pm
Location: Mt Evelyn VIC

Spacing Control arms forward

Post by bundyrules »

I've just fitted some 34 / 11.5 to my Bundera. The rims are cut and flipped so when in full lock the tyres are scrubbing on the bottom rear of the wheel arch.i It has a suspension and body lift and i am reluctant to get out the angle grinder or persuader.

Thought i'd try spacing the control arms forward. What should I use?


Damian
Last edited by bundyrules on Sat May 05, 2007 8:03 pm, edited 2 times in total.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

they will fit fine some recomended rim sizes are real funny 7" rim is good to 11.5" but not any wider id go 8" for 12.5", I have seen 42 15 15 swamper tsl on std range rover 15x 7 mags a few years ago
Post Reply

Who is online

Users browsing this forum: No registered users and 133 guests