Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring all your appliances?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Wiring all your appliances?

Post by g35me »

How has everyone wired in all there gear to the battery(s). I have a dual battery setup.

What terminals and so on are you using when you only have 2 positive and 2 negative connections yet I want/need to run winch to pos and neg of one battery, power inverter to the same pos and neg and also have the battery isolator to the same pos and then ground to the neg. So I have 3 full size cables going to each terminal. And I cant utilize the other batter because I have the starter cable to pos and ground to neg then all the cars electronics to pos and also accesories on that one.

What have you guys done in this situation?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

mm not sure on what u got but i have a dual batt setup with a manual switch between them.

i am running negative switching on the switch and then running a big + up to the back to a distribution block, then fused to each acc.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: Wiring all your appliances?

Post by Shadow »

brian haines wrote:How has everyone wired in all there gear to the battery(s). I have a dual battery setup.

What terminals and so on are you using when you only have 2 positive and 2 negative connections yet I want/need to run winch to pos and neg of one battery, power inverter to the same pos and neg and also have the battery isolator to the same pos and then ground to the neg. So I have 3 full size cables going to each terminal. And I cant utilize the other batter because I have the starter cable to pos and ground to neg then all the cars electronics to pos and also accesories on that one.

What have you guys done in this situation?
have a look at autobarn or other car audio places

I've seen battery terminals with 3 full size outlets. Gold plated too for that ricer effect.
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Re: Wiring all your appliances?

Post by Pinball »

Shadow wrote:
have a look at autobarn or other car audio places

I've seen battery terminals with 3 full size outlets. Gold plated too for that ricer effect.
gold plating is anodising to increase conductivity... better version of nickel plating.

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Winch needs to run off the main battery.
For the other items. Run a thick cable into the car and into a splitter block.
GU Patrol with go better bits added
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

And FUSE it close to the battery.

You can get high current fuse blocks from Dick Smith, Car Audio places, etc.
bru21 wrote:What happens in goat, stays in goat!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests