Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo Garrett ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

turbo Garrett ?

Post by giacomo.m »

Hi all,

I have a HZJ105 (1HZ engine ) with aftermarket AXT kit turbo,
the nameplate to turbochargers is : 1B (TB ?)012 4J
14411-17D03
471024-0003
which turbo is ?
Garrett ? Toyota ?
moreover me it seems that it is not water cooled,like would have to be the kit of AXT.

Thank you.

Giacomo
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

It's a garrett, possibly a T25.

Got pictures?
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

Post by giacomo.m »

Thank you all,

in the table of Turbo Master are : " C.H.R.A. " and " A/R " what is ?

Giacomo
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

giacomo.m wrote:Thank you all,

in the table of Turbo Master are : " C.H.R.A. " and " A/R " what is ?

Giacomo
CHRA is Centre Housing Rotating Assembly. It contains both wheels and the bearings/bushings.
A/R describes the geomtry of the housings (usually exhaust). Smaller numbers make the turbo spool up at lower rpm. Bigger numbers mean the turbo will spool up at higher rpm but also flow more air.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest