Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Have GU 4500 efi petrol that idles back to its idle setting very slowly, its causing me to stuff up very slow movments in low over rocks & the like. Starting to realy shit me. Have checked cables etc all move freely. Thanks in advance.
Robbo wrote::? Have GU 4500 efi petrol that idles back to its idle setting very slowly, its causing me to stuff up very slow movments in low over rocks & the like. Starting to realy shit me. Have checked cables etc all move freely. Thanks in advance.
Mate of mines is exactly the same... shaitting him to tears too.
Thanks but it has a uni chip & have checked for vaccume leaks also sprayed liberal amounts of carby cleaner in butterfly housing while reving but no change. Something else i have noticed is cold fast idle is taking longer to fall to 700 wich is warm idle setting. SNAFU
Robbo wrote:Thanks but it has a uni chip & have checked for vaccume leaks also sprayed liberal amounts of carby cleaner in butterfly housing while reving but no change. Something else i have noticed is cold fast idle is taking longer to fall to 700 wich is warm idle setting. SNAFU
does it have the air bypass on the throttle body ?? be carful spraying carbon cleaner in these as it can stuff the air bypass .
It will have a Idle by-pass (IAC valve) Be careful spraying carb clean in these cause it can stuff them. Some throttle bodys have a coating that dosn't like carb clean also.