Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Ratios on Air lockers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 143
Joined: Sun Oct 22, 2006 9:33 pm
Location: Inner West, Sydney

Diff Ratios on Air lockers

Post by dawg runner »

Gday,

Purchased some ARB Lockers a while back for my runner.

How do i confirm the ratios that are in them?

Do i read it off the crown wheel or something like that?

2nd question is i am putting a commodore v6 with Auto in the runner as well and eventually 33 inch tyres. What ratios would be ideal for this application or does it not matter?

Thanks in advance.

Dave
0424796069
"There is gold in them there hills"
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

the air lockers don't have ratios in them
Ransom note = demand + collage
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Odds are 4.3 or 4.5, these are the most common hilux ratios.

Turn the crownwheel one turn and count how many times the pinion flange turns.

I would have thought that 4.3 would have been fine- should be good for about 2400 rpm cruise at 100kph. Not super sure though, might be a little higher.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 193
Joined: Sat Jul 10, 2004 6:11 pm
Location: Sunshine coast Queensland

Post by SLOGQ »

Count the number of teeth on the crownwheel and the teeth on pinion gear, the devide them..

Eg 41/9 = 4.55

Easy
Top
Posts: 233
Joined: Sat May 14, 2005 4:59 pm
Location: newcastle

Post by mico »

Gwagensteve wrote:
I would have thought that 4.3 would have been fine- should be good for about 2400 rpm cruise at 100kph. Not super sure though, might be a little higher.

Steve.
mine runs at around 2600rpm with 4.3's at 100km/h
if it ain't broke send it to me i'll fix it!
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

there should be numbers stamped on the side of the crown wheel to tell you what you have
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

duncan wrote:there should be numbers stamped on the side of the crown wheel to tell you what you have
some i've done/had do and some don't so if your lucky they will be there if not count and devide it is
plenty of parts on the bench
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests