Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sand anchor

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Sand anchor

Post by bundyrum4x4 »

Have done a search with no success, so if any else who is more computer experianced than me and can find links for me I would greatly appreciate it.


I need to get an anker for Cliffhanger and want to know a bit more about them from people who have used them. Any help appreciated.

Thanks
Last edited by bundyrum4x4 on Fri May 18, 2007 9:51 pm, edited 2 times in total.
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

http://www.pullpal.com/aboutPP.html

http://www.outerlimits4x4.com/viewtopic ... ght=anchor

http://www.outerlimits4x4.com/viewtopic ... ght=anchor

http://www.outerlimits4x4.com/viewtopic ... ght=anchor

Just a start but im sure you could make up one of these for yourself. Helps to spell anchor right too. ;)

Rhys
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Rhysta wrote:Helps to spell anchor right too. ;)

Rhys
:oops:
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

there were some on ebay
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

try Beadlock Australia, 1/19 railway cres. croyden, vic 3136
ph 0397239550

theyre those red bent one piece ones, they quoted me $380 for the heavy one.
innovation is better, better is faster, and fast is all that counts
Top
Posts: 214
Joined: Tue May 30, 2006 6:37 pm
Location: Gembrook,Vic

Post by Evil 73 »

smithie you can borrow mine to model off if you wish, let me know or you can borrow it for cliffhanger, if you break it just have to replace it.

Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Top
Posts: 79
Joined: Sat Jul 09, 2005 8:50 pm
Location: Narre Warren,Vic

Post by muddymav »

try this ebay item

http://cgi.ebay.com.au/4wd-Recovery-Gro ... dZViewItem

dont know any any thing about em'
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Evil 73 wrote:smithie you can borrow mine to model off if you wish
Ben
Might take you up on that.

I made one some time ago but have not realy tested it. I don't want it to fail up there.

If I could have a look at yours it will give me a chance to compair.
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Mate in my humble opinion don't waste your time building one, buy one of Roger Smiths Ground Grabbers, we have used one in a few comps, Cliffhanger and OBC and they set really easily, they're strong and most important of all......they're proven! I personally wouldn't bother trying to build one (and I'm a budget bandit from way back!) because although they look basic there are a few tricks to them in terms of angles and strengths, we've seen lots of them fail or won't set, including those fold up ones.

Good luck with Cliffhanger mate, it's a great event.
Top
Posts: 214
Joined: Tue May 30, 2006 6:37 pm
Location: Gembrook,Vic

Post by Evil 73 »

bundyrum4x4 wrote:
Evil 73 wrote:smithie you can borrow mine to model off if you wish
Ben
Might take you up on that.

I made one some time ago but have not realy tested it. I don't want it to fail up there.

If I could have a look at yours it will give me a chance to compair.
The one i have i bought of chippa and its been used and tested in OBC and the like let me know what ya want to do smithie.

Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Top
Posts: 79
Joined: Sat Jul 09, 2005 8:50 pm
Location: Narre Warren,Vic

Post by muddymav »

heres a link to the ground grabber.

http://www.dnaoffroad.com.au/winch%20gear.htm
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 137 guests