Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

undoing fuel filter- F*^KN things not moving

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

undoing fuel filter- F*^KN things not moving

Post by BadLux »

:bad-words:

YES I AM TURNING IT THE RIGHT WAY... Looking from the top turning it to the right

Won't budge... Using filter tool as well just doesn't seem to want to budge
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Oxy torch. :lol:
GU Patrol with go better bits added
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

cold chisel and hammer, dont hit too hard though or you could bend the housing.

Just work away at several points around the rim of it.

thats how i got mine off after the engine rebuild, dude must have put it on with a shifter or something.
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Go get a can of spinach and harden up you sook :D

Failing that, as a last resort, and you wanna make sure it works :lol: , get a LONG screwdriver, drive it through the middle of the filter, and then use the screwdriver as leverage and twist.
60 + Turbo, 33"s :armsup:
Top
Posts: 534
Joined: Mon Jul 24, 2006 9:38 pm
Location: On The Beach

Post by turkey »

RockyF70 wrote:Go get a can of spinach and harden up you sook :D

Failing that, as a last resort, and you wanna make sure it works :lol: , get a LONG screwdriver, drive it through the middle of the filter, and then use the screwdriver as leverage and twist.
X2 or take the housing off from the firewall as well and stick in vice. Worked for me once :armsup:
"The Bushpig"
Top
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

Yeah they can be a pain to a pain to get off, I had to spear it with a screwdriver to get mine off as well.
It's hard to soar like an eagle when you are surrounded by geese.
Top
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Somtimes get ya hammer and tap around the filter as u try un doing it and try brake the seal if that makes sense ... i might be wrong :oops:


Rick.
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

RockyF70 wrote:get a LONG screwdriver, drive it through the middle of the filter, and then use the screwdriver as leverage and twist.
Yep, works well if needed... I did it to an oil filter once too :D

Just hope you can get it off once there's a hole in it :rofl:
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

What kind of filter tool are you using? Strap or metal one? A filter strap with a 1/2" ratchet should do it no problems, and if it slips you need to be tighterererer.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

filter

Post by micks troll »

If you dont mind f'ing the filter hammer a screwdriver into side and turn. without knowing what filter it is. Had to do this to an oil filter that some dingbat did up to tight.
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

before putting the new ones one smear the orings with grease on fuel and oil filters makes it easier to get of next time
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Ruggers wrote:before putting the new ones one smear the orings with grease on fuel and oil filters makes it easier to get of next time
x2 :D
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

RockyF70 wrote:Go get a can of spinach and harden up you sook :D

Failing that, as a last resort, and you wanna make sure it works :lol: , get a LONG screwdriver, drive it through the middle of the filter, and then use the screwdriver as leverage and twist.
This is what I did to get mine off! It was on that tight that when I had pierced it with the screw driver and was unwinding it, it was tearing the filter and not turning. Luckily it finally budged and I was able to remove it.
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 77 guests