can any one tell me if the tail shafts are inter changable?
the W/T is an 88 soft top swb
the n/t are out of a swb too not sure of model
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
N/T tail shaft in a W/T
Tail shafts are interchangeable but the flange bolt pattern is different so you will need the yokes from the the WT. A good opportunity to put new unis in and call it good.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: N/T tail shaft in a W/T
no , there are three different bolt paterns for the flanges , and you have two , the third is the later w/t.CYCO ZOOK wrote:can any one tell me if the tail shafts are inter changable?
the W/T is an 88 soft top swb
the n/t are out of a swb too not sure of model
Who is online
Users browsing this forum: No registered users and 0 guests