I am looking for a way to mount an EGT gauge in the 100 series that is easily visible. The best I can come up with is a pod on the A pillar.
Has anyone seen a pod that would suit this application, or have any alternate mounting ideas?
Thermoguard does an LED one, but putting it somewhere visible and non obtusive is difficult.
Thanx
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gauges and Gauge Pods
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Gauges and Gauge Pods
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Considered a dash pod?
http://www.consoles.com/Toyota_100Series_dash.htm
I do believe A Pillar gauge pods were illegal in QLD, few of the guys on the Surf forum were picked up for them.
http://www.consoles.com/Toyota_100Series_dash.htm
I do believe A Pillar gauge pods were illegal in QLD, few of the guys on the Surf forum were picked up for them.
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
http://www.toyotasurf.asn.au/forum/view ... +pod#26998bogged wrote:ya kidding?!+dj_hansen+ wrote:I do believe A Pillar gauge pods were illegal in QLD, few of the guys on the Surf forum were picked up for them.gee they are dangerous after all...
Speculative information there... in short:
- can disrupts drivers field of view accross bonnet.
- backlights can distract other drivers.
- driver has to look 'down' to see the guage.
Apparently in Vic, no such dramas. Mr RN sir? off the record
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
+dj_hansen+ wrote:
Speculative information there... in short:
so can steering wheel, dirt on screen, a fly going past etc.- can disrupts drivers field of view accross bonnet.
I regularly drive along looking deliberately for other drivers pillar pods- backlights can distract other drivers.
What about speedo, and fuel gauges etc, you have to look 'down' to see them...- driver has to look 'down' to see the guage.
I think the baconer didnt like the bloke. I'd challenge them. then again, they are all 100% critical deadly situations eh
autron make a pillar pod to suit gu pootrols.... they look ace and i am trying like buggery to find something like this for the hungy myself..
check it out here....
http://www.autron.com.au/newweb/index1280.htm
check it out here....
http://www.autron.com.au/newweb/index1280.htm
Fat people are harder to kidnap....
Don't worry about Bogged, he just feels that his views/opinions are 'VERY IMPORTANT' & all should listen to what he has to say+dj_hansen+ wrote:messenger......
Hey Brucey, did you bother to check whether or not your bling pillar pod is legal in your state as I know of a guy that had a canary put on his & the pillar pod was on the list of defects
More poke = More smoke!!!
Just because ol Habib has something similar in his taxi , doesn't mean it's not against the law .
I think if ya did tell the law how to do his job, he might find a few more things to ping ya on while he's there though I agree that you'd be pretty hard done by if you were pinged for the pod
.I think if ya did tell the law how to do his job, he might find a few more things to ping ya on while he's there though I agree that you'd be pretty hard done by if you were pinged for the pod
More poke = More smoke!!!
na dude, wasnt shootin the messenger ... was just in disbelief that a copper would book someone for something as pathetic as that!+dj_hansen+ wrote:
unbelieveable...
With some of the shitboxes driving around (theres a brown galant wagon 70's model at work with chain holding the passenger side door shut, no mirrros, 1 tail light completely missing and more.... ), they pick on somethin like this...
No worries bogged. Not knowing the full story... it probably just 1 on a list of things that they found to be in disagreement with.bogged wrote:na dude, wasnt shootin the messenger ... was just in disbelief that a copper would book someone for something as pathetic as that!+dj_hansen+ wrote:
unbelieveable...
With some of the shitboxes driving around (theres a brown galant wagon 70's model at work with chain holding the passenger side door shut, no mirrros, 1 tail light completely missing and more.... ), they pick on somethin like this...
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
They are only illegal if they obstruct your view from the drivers seat. I had mine down at the base of the A pillar. A pig challenged my once on it, made him sit in the car and then try and tell me they obstructed the view. They just need to be carefully placed to avoid the fuzz getting the rocks off by defecting you.
2002 Hilux Dual Cab - 2.7L Pet 5spd - TJM Steel Bullbar - 31" Wrangler MTR's - Lightforce 240's - Backyard Custom's Roof Console & DIN Slot Panel
Twisted by Design
A mate and I made this for the water temp gauge in my 4Runner......Glued PVC pipe to the a pillar plastic to sit the guage how we wanted it, then bogged it all up and sanded back smooth. Then finally he wrapped it in matching vinyal to the rest of the interior. Makes it look factory!
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
That's very nicely done...TWISTY wrote:A mate and I made this for the water temp gauge in my 4Runner......Glued PVC pipe to the a pillar plastic to sit the guage how we wanted it, then bogged it all up and sanded back smooth. Then finally he wrapped it in matching vinyal to the rest of the interior. Makes it look factory!
If I only wanted to add one gauge in my GQ, I would consider ripping out the original clock and putting a gauge there. There'd be room for a single 52mm gauge I think.
I do not know whether this idea has any merit for a 100 series or any other vehicle, but there are plenty of places to fit an aftermarket clock (usually comes with a stereo anyway) so it is a thought.
Actually assuming this is a typical 100 interior:
... what about cutting into the plastic panel that holds the hazard light switch etc, repositioning those three switches a bit closer together, and making room for the gauge? Too fiddly?
This is not legal advice.
Pic herechimpboy wrote:That's a pretty good idea.KiwiBacon wrote:Found an interesting solution the other day.
Fits into a single DIN stereo hole and holds 3 52mm gauges.
Swap out that ridiculous toyota double DIN thing and you're sorted.
http://www.impossible-performance.cwc.net/meters.htm
A speed camera would have prevented that!
The ADR's dictate where what goes etc so I would have to check those...but if the guages dont distract the driver, or block forward vision it maybe ok...not sure about night time when you would have a bright guage above dash height in your line of sight..again maybe an ADR issue.+dj_hansen+ wrote:http://www.toyotasurf.asn.au/forum/view ... +pod#26998bogged wrote:ya kidding?!+dj_hansen+ wrote:I do believe A Pillar gauge pods were illegal in QLD, few of the guys on the Surf forum were picked up for them.
Speculative information there... in short:
- can disrupts drivers field of view accross bonnet.
- backlights can distract other drivers.
- driver has to look 'down' to see the guage.
Apparently in Vic, no such dramas. Mr RN sir? off the record
Talking of blocking of forward vision...we have the new VE SS's at work.
but one thing, the A pillar is very thick and cars and solo's can get 'lost' behind the A pillar quite easily. The A pillar on these have airbags installed so I guess that is why they are so substantial. ( ah, bring back the HQ and XA 'A' pillars)
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Who is online
Users browsing this forum: No registered users and 128 guests