Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3lt Turbo exhaust

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 12
Joined: Tue May 29, 2007 10:00 pm

3lt Turbo exhaust

Post by Goldielux »

I have an 04 Hilux and have been told a 3inch exhaust will improve the power and fuel consumption, what are your thoughts.
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

exhaust

Post by Mud_5lut »

DO IT! i have a 2.8 intercooled turbo and the best thing i did was put a 3 inch dump pipe of the turbo and straight through with no mufflers or anything just out the back. if you can with stand a little noise not to much you will be very greatful. The quicker you get it out the better with the diesel's. my 2 cents. hope you make the right descision let me know.
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

yeah big difference too.... only in the dump pipe though i got a 2.5 inch from the flex back it it just sounded cool. get the 3 inch dump pipe if you wanna notice any difference in power ... and dont worry you will notice it . hope it helps
Email - flossamarosus@hotmail.com
Posts: 12
Joined: Tue May 29, 2007 10:00 pm

Post by Goldielux »

Thanks fellas, I'll get it done this week and post my thoughts.
Posts: 12
Joined: Tue May 29, 2007 10:00 pm

Post by Goldielux »

Well I had the pipe done, the bloke who installed it for me use an adaptor plate ordered from melbourne that bolted onto the bum end of the turbo, he then made a new 3in pipe to suit the plate.
All I can say is, if you are considering doing this, GO FOR IT!.
The power is much better.
Posts: 104
Joined: Tue Jun 12, 2007 9:36 am
Location: Central West

Post by the unbreakable luxtruxs »

Goldielux wrote:Well I had the pipe done, the bloke who installed it for me use an adaptor plate ordered from melbourne that bolted onto the bum end of the turbo, he then made a new 3in pipe to suit the plate.
All I can say is, if you are considering doing this, GO FOR IT!.
The power is much better.
you wouldn't know where the plate came from, I'm about to do similar to my 3Lturbo soon.
Cheers
Posts: 12
Joined: Tue May 29, 2007 10:00 pm

Post by Goldielux »

Not sure, it is the same plate they use for the prado though, I'll find out where he ordered it from and let you know.
Post Reply

Who is online

Users browsing this forum: No registered users and 60 guests