just a quick question, what do you all think of the iron man 9500lb winch?
just looking for a bit of feed back
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
IRON MAN WINCH
Moderators: toaddog, TWISTY, V8Patrol, Moderators
IRON MAN WINCH
Zooks are for people that aren't afraid of angles and who have nothing to compensate for
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Ironman is one of the good ones. 
Have a read of the "Which Winch" tech I wrote in this edition:
http://autumn2006.4wheelingoz.com/autumn%202006.htm
Have a read of the "Which Winch" tech I wrote in this edition:http://autumn2006.4wheelingoz.com/autumn%202006.htm
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz
My website: http://www.touring4x4.com/
Whyalla SouthOz
My website: http://www.touring4x4.com/
I'd love to get one of these. Only problem is opposite lock in newstead are the only place I know of that sell them, and they are basically the same price as a warn. Im sure they are overcharging, what should I expect to pay for the 9500p ironman?
2002 Hilux Dual Cab - 2.7L Pet 5spd - TJM Steel Bullbar - 31" Wrangler MTR's - Lightforce 240's - Backyard Custom's Roof Console & DIN Slot Panel
Boab at lawnton sell them as well. 3205 5766Rb25sil80 wrote:I'd love to get one of these. Only problem is opposite lock in newstead are the only place I know of that sell them, and they are basically the same price as a warn. Im sure they are overcharging, what should I expect to pay for the 9500p ironman?
Found this one on ebay
http://cgi.ebay.com.au/Ironman-9500lb-4 ... dZViewItem
$755 delivered aint bad. I'd prefer to get it from a shop though so i've got someone to whinge too if it stuffs up
Im sure I read on 4wdmontly and possibly the winch comparo test that some ironmans are rebadged chinese knock offs, is there anyway to tell the genuine item from the imposters?
Will have to price up some warns as well as visit Boab tomorrow, I dont mind paying the extra if it's just a couple of hundy, piece of mind I think.
http://cgi.ebay.com.au/Ironman-9500lb-4 ... dZViewItem
$755 delivered aint bad. I'd prefer to get it from a shop though so i've got someone to whinge too if it stuffs up
Im sure I read on 4wdmontly and possibly the winch comparo test that some ironmans are rebadged chinese knock offs, is there anyway to tell the genuine item from the imposters?
Will have to price up some warns as well as visit Boab tomorrow, I dont mind paying the extra if it's just a couple of hundy, piece of mind I think.
2002 Hilux Dual Cab - 2.7L Pet 5spd - TJM Steel Bullbar - 31" Wrangler MTR's - Lightforce 240's - Backyard Custom's Roof Console & DIN Slot Panel
The photo of the one on ebay is identical photo with just a different name brand on the top, to the photo of the aldi winch in another thread at the moment.
My understanding is the Ironman ones are a cheap Chinese winch but with upgraded parts to make them strong and reliable.
I personally love the look of the Ironman Bullbar, and would love to buy their combo with the winch and bar.
I've not heard of anyone having a failure with an Ironman one. For the slight price difference between theirs and the Aldi one, I'd rather the Ironman knowing they've specified stronger components in theirs.
My understanding is the Ironman ones are a cheap Chinese winch but with upgraded parts to make them strong and reliable.
I personally love the look of the Ironman Bullbar, and would love to buy their combo with the winch and bar.
I've not heard of anyone having a failure with an Ironman one. For the slight price difference between theirs and the Aldi one, I'd rather the Ironman knowing they've specified stronger components in theirs.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
So if Ironman etc are very similar to the Chinese Cheapies, is it possible to upgrade the gears and solenoids etc to improve the cheapies. It is suggested that they are all manufactured by the same people in the same factory, just that certain brands have higher spec components.
Reason I ask is there is a guy here at work with an "ebay" winch he got as a present but no winch bar, he is willing to unload it cheap (even cheaper than on Ebay). If I could get some hardened gears and better solenoids it might be a worthwhile project.
Reason I ask is there is a guy here at work with an "ebay" winch he got as a present but no winch bar, he is willing to unload it cheap (even cheaper than on Ebay). If I could get some hardened gears and better solenoids it might be a worthwhile project.
'89 SWB Soft Top, 6.5:1 Calmini gears, rear Lockright, 31s, pwr steering. 1.3 16vmpfi 1300 going in
Ironman, Brawn, Tmax, Ox, Repco, etc...all come out of China. To start with the older KEW range should be avoided. The newer range are much better but there are problems not only with quality control but also with which factory they actually come out of in China.
Ironman have done a lot to improve quality control at the factory end and do use a better factory. Brawn knew that the winches and quality control were crap and fixed all of the problems locally with some very intelligent mods.
I used Brawns for year and have been very happy but are now onto the new range of Superwinches (EP9.0 range) and these are very impressive with twice the line speed of the chineses ones and a quarter the noise and vibration...and they are exceptionally reliable (funnily enough they come out of the same factory as the Premiere winch but with improved solenoids).
Ironman have done a lot to improve quality control at the factory end and do use a better factory. Brawn knew that the winches and quality control were crap and fixed all of the problems locally with some very intelligent mods.
I used Brawns for year and have been very happy but are now onto the new range of Superwinches (EP9.0 range) and these are very impressive with twice the line speed of the chineses ones and a quarter the noise and vibration...and they are exceptionally reliable (funnily enough they come out of the same factory as the Premiere winch but with improved solenoids).
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
i was just on the phone to a guy at TJM and he said that soon as you do your 1's winch to the left or right the gears stuff up dose anyone know about this or is he just spining shit to try get you to buy one of his brands. also dose anyone know if the IronMan has hardened gears and roller bearings?
I Love My Bullbar And I Vote
06" dual cab hilux
06" dual cab hilux
I currently have my winch back at the distributor in Melbourne being repaired under warrenty.
I bought an ironman winch in december 06, was in Tassie in March, and the whole car died, (no power to anything). Opened the hood to find sparks jumping off the battery. Disconnected all leads and worked through them all. Turns out the winch is live and was causing an arc when touching the battery terminal.
What is even more frustrating is that other than unwinding and respooling in my back yard, the winch was still brand new.
Paid $650, inc a winch dampner, remote wireless control and 3 year warrenty.
Sprayed everything with WD40, hoping that it was just water in there (even though it hadn't been submersed) but still arcing up.
Returned it to place of purchase at the end of March, and are still waiting for my winch to be returned. Only 3 months!!!
Have rang a few times, both local guy and melbourne office and still no answer. May have to put the pressure on them both.
Just my experience!!!
George
I bought an ironman winch in december 06, was in Tassie in March, and the whole car died, (no power to anything). Opened the hood to find sparks jumping off the battery. Disconnected all leads and worked through them all. Turns out the winch is live and was causing an arc when touching the battery terminal.
What is even more frustrating is that other than unwinding and respooling in my back yard, the winch was still brand new.
Paid $650, inc a winch dampner, remote wireless control and 3 year warrenty.
Sprayed everything with WD40, hoping that it was just water in there (even though it hadn't been submersed) but still arcing up.
Returned it to place of purchase at the end of March, and are still waiting for my winch to be returned. Only 3 months!!!
Have rang a few times, both local guy and melbourne office and still no answer. May have to put the pressure on them both.
Just my experience!!!
George
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
what the ??????????? wheres the pictures this is hear say without proofCWBYUP wrote:I was a fan of these items until i heard about a fanta can being used as a component ( spacer ) in the winch.
A amte is chasing the photo, will post once i find
Nick
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Who is online
Users browsing this forum: No registered users and 145 guests