Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where to get 200mm PVC - Brisbane
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Where to get 200mm PVC - Brisbane
Trying to make up some water tanks to go underneath. Does anyone know where i can get some 200mm PVC pipe without buying a full 8m length?
Thanx
Paul
Thanx
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Banned
Never by Stormwater or DWV pipe from Bunnings they are too dear. Always go to a Plumbing supplies & ask for trade price or in some cases try prefferred Trade. Preferred Trade is nearly the same price as what a plumber pays. Shouldn't Pay anymore than $110 for 225mm X 6Mtr Stormwater & $46 for 150mm x 6Mtr Stormwater. You should also be able to by 90mm x 6Mtr Stormwater for @ $16.40 hope this helps
try and get dwv pipe you may pay a little more but it is uv sablised where storm water is not as it is only suitable for under ground use unless it is coated with paint or something, dwv is also thicker and stronger. However if you do get storm water pipe it would be better if you use dwv caps and not dust caps as they are less likely to break, especially if you plan on also using it for tent pole storage if this is the case i would also recommend that you cut circular pieces of ply to insert in the inside of the cap before you glue it on and then screw through the side of the cap through the pipe and into the edge of the ply to stop it blowin out and then use a piece of foam stuffed in before you screw the cap on to stop them moving around.
i have some 150 pipe here that i could sell you thats left over from makin a tank. may have some fittings that you require to make your tank also.
i have some 150 pipe here that i could sell you thats left over from makin a tank. may have some fittings that you require to make your tank also.
i got nothin
Who is online
Users browsing this forum: No registered users and 2 guests