Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq sills...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

gq sills...

Post by viperguy »

how hard is it to fix pretty badly dinged in sills? went out for a thrash today ina private quarry and realised that i should have got sliders about 2 yrs ago when i first built up my truck. both sides have been fully pushed in and the floor area where door closes have been bent up. bottom of doors have some damage but still close and seal ok enough.

they look like a prick of a job to beat out and id need about 15kg of bog which im not keen on anyway. has anybody chopped sill out and plated them? ideas please...
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

aftermarket sills are about $50 or get some checker plate bent up, there are some pics in the members section, try lookin in swb rebuild?
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

by after market u mean the replacement section? i can chop out damage and weld in new section? i have a template for the checker plate from patrolden on here. could be a possibility
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

if the sills are that bad pull them out ruff with a $20 super cheap slide hammer n do the checker plate and sliders
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

i dare say thats what i will have to do... they are pretty shot. 5inch susp + 2 inch body and 37s wont make up for bad wheel placement...
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

cut them out n weld in 3mm wall box section

can be seen on the wagon in the link below or zeros mq
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

What side RHS was used? It looks like 50x50 but it's a bit hard to tell from the pick.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

looks like 50 x 75
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

50x75.
zero used 40x80 wich is a much neater fit http://www.outerlimits4x4.com/viewtopic ... c&start=30
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 33
Joined: Mon Oct 26, 2009 11:44 pm
Location: Swan Bay/NeWy

Post by cookieGQ »

i've got a LWB gq and my sills were farked, Work told me i needed time off got on here seen a few shorty's with sill chop and hacked mine off, all i used was 3mm flat sheet BUT i am fitting sliders to protect whats left from being destroyed again
CHICKS DIG BODY DAMAGE!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 64 guests