Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff winches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Diff winches

Post by ausyota »

I am setting up a truggy soon with an airshock setup.
Im thinking of a highmount winch on the front and rerouting the cable so it can go either down to the diff or out the front for recovery purposes.
For the rear Im thinking maybe rather than getting a piddly little winch for suspension only maybe get a low mount 8000 pound and be able to use it for rear recoveries also.
Will I need to put pulleys on the diffs or will single line be OK?
Also does the shock loads from the suspension cycling cause any damage to the winches? Im thinking not with a big winch?
Cheers
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Paul when I read about this quite a while ago the guys of here were useing cheap winches from super crap.They aparently were lasting the longest and at just over $100 are very cheap.I have run mine straight to the front diff with no pulley seems to work just fine never had a problem.

Duncan
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

I had 1 of thoses $100 1000lb? winches with a pulley mounted to my rear diff, would only pull the airshocks down 1-1.5" when sitting on level ground. Had a 8000lb on the front, that was much better and quicker and didnt need to set up a pulley and spring to keep tension, just a straight run to the front diff.

I wouldnt bother mounting a cheap winch again.
Shane
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

we run a warn atv winch due to the internal brake and then run anchor rope (~30% stretch to reduce shock loads and wheel unloading) and run a double pulley up top and a single on the diff (2:1)
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Post by Roctoy »

i ran a super works winch from supa cheap on the back with 9mm climbing rope instead of the 6mm cable that came with it, never had a problem. $100 as opposed to the warns ($400 i think)

i used a pulley on the housing.

front i ran a warn low mount.
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

I dont know much about the buggies, but I am quite interested in them, so no flaming me on this one.

I see the winches hooked up to the diffs of the buggies and the drivers 'lowering' the buggys using them on slopes, is this done to reduce the COG, or to assist traction, or both. And what other purposes does it do besides recovery.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Post by Roctoy »

Chucky wrote:I dont know much about the buggies, but I am quite interested in them, so no flaming me on this one.

I see the winches hooked up to the diffs of the buggies and the drivers 'lowering' the buggys using them on slopes, is this done to reduce the COG, or to assist traction, or both. And what other purposes does it do besides recovery.
yep, lower COG, helps the airshocks from unloading when dropping off steep stuff too.
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

cheers

Would love to get into this side of the sport when dollars permit.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests