Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lots of blue smoke but still running great.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

lots of blue smoke but still running great.

Post by Mud_5lut »

may be a question for the dance but here we go. have a 92 2.8 lux. aftermarket safari intercooled turbo kit on it. 225,000km's. went wheeling on the weekend. big bog hole filled the cab back out not a problem coughed a little but pushed air out of the fuel filter no worries. vacuum pump on the back of the alternator for the brakes shit itself so i had no brakes. 20km of driving after that motor starts running a little rough not real bad but just awsome amounts of blue smoke. and has a slight knock in the top cover. bit of help would be nice so i can get some prices thanks guys.
Posts: 97
Joined: Thu Feb 08, 2007 10:17 pm
Location: Perth

Post by bravo »

sounds like you are burning oil, check you turbo seals. Also the knock in your top cover could be one ov your valves fucked or a hydraulic lifter jammed
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

could be alot of things...you mention fuel filter, if it was the air filter full of water, you may be looking for a new motor... best way to deal with this is...drop oil and have analysed...cost $7 at castrol or whoever you buy oil through..
pull out intercooler pipes, if oil runs out everywhere, you have stuffed the turbo seals, and that is the oil problem. If theoretically the turbo is spewing oil, you will have low oil level in sump. The rattle will be preignition of oil...
now...the 2.8 has a real issue with clearances head to valve to piston....if water got in there and bent a rod, 20kms later, the big end would be wearing out and piston would be touching head and valves....when you crank it does it sound normal or is there a miss in the noise from low compression???
as i said earlier, oil test will reveal big end problem, intercooler oil test will point to turbo seal.
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

Results on compression.

Post by Mud_5lut »

after coming out of the hole i checked the air filter for water and it was dry as, which was a big sign of relief. rang a guy in granville sydney today about my turbo between 800-1200 bucks to re-do my turbo (auto-tech) mate has had a few of these and wreckons i have cracked a piston or so. RESULTS- just got a call number 3 cyclinder is 25psi lower then the rest. seems interesting.
Posts: 97
Joined: Thu Feb 08, 2007 10:17 pm
Location: Perth

Post by bravo »

i had that on a mazda bravo one of the valves wasnt seating properley, didnt cause it to blow blue smoke though, but that was a recon head job (wait thats worded badly)
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

sometimes a hot motor in cold water can freeze the block and the piston grasb the bore....bad news...what did u mean coughed a little but pushed air out of fuel filter?
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

Final Results

Post by Mud_5lut »

crank bearings have shat, crank needs grinding head is ok but is going in for a service, turbo is totally shat big time, and new rings, vaccum brake pump shat. so over haul good job. doing a full rebuild new pistons all the gear sending my turbo into turbo technics at cardiff in newcastle nsw to get fixed will let you know what the service and job is done like heard they are pretty good. other wise thats wheeling and trucks. thanks for all the replies guys appreciate it and hope this helps with some of the rest of the guys probs. cheers mud 5lut.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

b4 u do that do some surfing on ebay aswell as pickles.com...u will pick up a whole lux rolled for less than the rebuild will cost. also ebay sell shitloads of turbos and 3 litre diesels..the 2.8 is renowned for doing this, you may have got some water in and have bent rods aswell....just not worth fixin....sorry to hear all this...
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

1 reason i'm not into mud and bog holes that much plus it's a shit to clean unlucky i suppose
plenty of parts on the bench
Post Reply

Who is online

Users browsing this forum: No registered users and 143 guests