Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

puller for crankshaft pully and timing gear 300Tdi

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 9
Joined: Fri Jun 15, 2007 3:50 pm

puller for crankshaft pully and timing gear 300Tdi

Post by aussben »

Hi All,

I am about to do my timing belt on my 300Tdi, I need to get a crank shaft pulley puller and a timing gear puller. Is there anyone who could tell me where I could these pullers in Sydney?

Thanks

Ben
Top
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

I just used a universal harmonic balancer puller & used some M5 x 100 socket head capscrews for the timing belt gear.

<edit> I made a crank pulley holder, but Maxi Drive sell 'em cheaper than I made mine :oops:

Flywheel locating pin was a brass 1/4 x 1/8 BSP reducing bush re-threaded for an M6 bolt (with the end turned down to 5mm.) Just screw it in to lock the flywheel. </edit>
300Tdi Defender 130 CC
Top
Posts: 9
Joined: Fri Jun 15, 2007 3:50 pm

Post by aussben »

Thank for your info, I have seen the universal ones I just was not sure if they would be strong enough if the harmonic balancer has been loctited on.

Who is maxi drive? I do need to get a crank shaft pully holder.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests