Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Changing a 28 spline 9" to 31 spline

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 84
Joined: Fri Feb 03, 2006 10:19 pm
Location: medowie

Changing a 28 spline 9" to 31 spline

Post by dv8666 »

I've got a 28 spline 9" centre I spent 1650 on getting rebuilt, now I don't need it in the falcon anymore, but it's the right ratio for the Bronco. Problem is Broncos are factory 31 spline, is it hard to change the centre to suit the axles?
Top
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

if its an lsd then yes it will cost a lot to change over. or u could just put a min spool or full spool or detroit locker in that is 31 spline and it will fit.
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

Is the falcon centre LSD?
Is the Bronco centre LSD?

If so, get the spider gears changed over.

Or put a spool in it, less than $300, unbreakable, light weight, and locked.

Or a minispool, $100, locked, but rely's on the ford case.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 58
Joined: Sun Jun 10, 2007 5:06 am

Post by krf_bb »

ring craft diffs in sydney they can help you
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest