Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Project Landrover SIIA Ute

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Project Landrover SIIA Ute

Post by srowlandson »

Just started the restoration of a SIIA Ute.

Full details of the vehicle / restoration here:

Image

This one will be pretty much back to stock, with a few mods to make life easy and a set of spare tyres (either pedes or swampers) for weekend runs.



http://landrover.offroader.com.au


Steve
'64 Land Rover SIIA Lwb Tray
Top
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Post by muddydigger »

interesting Ill be watching, but I spy a nice xj Jag!!
For Kart racing information please visit our site at www.auskart.net
Top
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

I take it you're John's brother?
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

muddydigger wrote:interesting Ill be watching, but I spy a nice xj Jag!!
correct, my old mans xj coupe....
'64 Land Rover SIIA Lwb Tray
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

jsttry wrote:I take it you're John's brother?

Correct, i have taken over the project ... it was my idea anyways...
'64 Land Rover SIIA Lwb Tray
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

srowlandson wrote:
muddydigger wrote:interesting Ill be watching, but I spy a nice xj Jag!!
correct, my old mans xj coupe....
Oh, and is a Daimler, not a Jag ;)
'64 Land Rover SIIA Lwb Tray
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

inner guard removed, floor out, the door tops are BADLY rusted... the work continues

Image

Image

Image

Image

Image

Image
Image
Image
Image
Image
'64 Land Rover SIIA Lwb Tray
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Great project.

I can recommend galvanising a few of the steel bits - to save you having to worry about them later.

On my IIA I galvanised the firewall and door bottoms (among other things). On my dads - we also galvanised the chassis, rad support, and just about every other steel bit even down to the pedals and pedal boxes!!!
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

More work to strip down the body:

Image
Floor out - removed passenger seat.

Image
Thanks the lord for the air ratchet.

Image


Full writeup :http://landrover.offroader.com.au/
'64 Land Rover SIIA Lwb Tray
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Steve, there is a 2.6L S2A at Pick Pay and Go on Heatherdale Rd in Melb with a good firewall--would need modding as 6cyl has deeper center section than 4cyl or just leave as it....

Nick
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

Woop wrote:Steve, there is a 2.6L S2A at Pick Pay and Go on Heatherdale Rd in Melb with a good firewall--would need modding as 6cyl has deeper center section than 4cyl or just leave as it....

Nick
Might have to check it out, there are a few other parts I need...
'64 Land Rover SIIA Lwb Tray
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

Managed to get the roof off by unbolting the back wall and undoing the wndscreen butterfly nuts. The Roof is now off

The floor is now completely out, havng to unbolt the clutch and brake pedals. Unfortunately the brake line won’t unbolt frmo the master cylinder

I have undone the bolts mounting the back wall to the chassis, 3 stubborn bolts hold it in place.

More unbolting of the radiator surround has it about 80% out
Image

Image


More Photos: http://media.offroader.com.au/photogall ... enOff.html

Full info on project:

http://landrover.offroader.com.au
'64 Land Rover SIIA Lwb Tray
Top
Posts: 260
Joined: Wed May 05, 2004 5:29 pm
Location: northern suburbs vic

Post by holeyhardtop »

this is coming along nicely, makes me want one. my first fourby was a 2A hardtop wagon, it went everywhere the new stuff goes, just not as comfy.
[quote="4runner2.8"]i have one.... and iv done a few long hard pulls with it too.[/quote]
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

Image

Oops, The guard fell off :)


Image

http://media.offroader.com.au/photogall ... dsOff.html
'64 Land Rover SIIA Lwb Tray
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

More Sanding today on the doors and the firewall. The door skin on the drivers side was particularly bad having a strip of fibre glass in the bottom section to badly cover a rotten door skin. It might be easier to replace the ddoor skin here. The Firewall was wire brushed to expose some rust sections. Looks like a replacement panel will need to be ordered for here and mig welded in place.I spent a good hour wirebrushing the chassis and other components to get rid of the dust dirt and grime ready for the chassis blacck paint to go on. A new tool joined the shed from Super Cheap Auto, taking advantage of their 20% off sale. I picked up a Die grinder which will be of great assistance when i start the welding of the panels etc.


Image
Image

the roof has about 5mm of filler over it , its taking its time to be stripped back so I can attempt to get the roof repaired.


Photos from today:

http://media.offroader.com.au/photogall ... nding.html

Image
Image
'64 Land Rover SIIA Lwb Tray
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 47 guests