Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux engine swap

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 29
Joined: Mon Jul 28, 2003 11:49 pm
Location: Camden, N.S.W.

Hilux engine swap

Post by Da Krusha »

G'day guys
Mate cooked a '89 2.4 diesel hilux motor. Bought a rolled one and we're gonna rip the motor out of it to put in his. Any thing we should know before we start.
We're not changing anything. We're putting a 2.4 back in it.
Are we in for any suprises?
Ta.
P.S. PM me if you want any parts from an '89 diesel hilux
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

89 .. should be a 2.8 not a 2.4 ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Could be say 3/89 which is just prior LN series i think. Quick way to tell look at the ID tag on firewall or engine number just in behind thermostat housing above injector pump does it start with 2L****** or 3L******
2L is 2.4 3L is 2.8
plenty of parts on the bench
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Well there you go .. I thought all 89s were 3l's ..

Either way the 2l or 3l will go in the hole without an issue.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 29
Joined: Mon Jul 28, 2003 11:49 pm
Location: Camden, N.S.W.

Post by Da Krusha »

Had a bit of a whoops guys
My mate cooked an '85 and is pulling the motor out of an '88.
Sorry bout that
are we in for a headache?
Top
Posts: 68
Joined: Thu May 05, 2005 6:24 pm
Location: Gold Coast

Contact:
Contact hylux

Post by hylux »

nup none that I can think of...... just check the sumps are the same,but they should be.
84 Hilux 2.4l turbo, 2" Body lift ......
Power Steering ;) ....
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 104 guests