Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD42 air intake restriction
TD42 air intake restriction
hey guys, im new to the forum and new to my patrol ute.
Last week i bought a 1997 TD42 patrol ute with what is said to be a 4" lift. its on 315/75R16 cooper S/T tyres.
driving, it is nothing compared to my old corolla with a supra motor, but i felt it went alright for a diesel in a big truck. however, i was expecting decent economy.
i filled up, got 70 litres in the tank, and after 350 km's its now around 1/4 remaining. which is really quite bad in my opinion for what has essentially been mainly highway driving....
i find the ute losses alot of pace up hills and really struggles to maintain speed, even when you drop it back a cog and really found this quite unexpected being a big diesel.
so i thought i would start with checking for any obstructions to airflow and im gonna check the fuel filters etc to ensure everything there is good.
so i think that informs more or less with whats going on.
so as i said, i went looking for air restrictions etc, and came across this puppy...
thats the bit that goes just inside of the gaurd and connects to the snorkel.
To me, that is a massive air restriction and goes against everything i know, albeit, not alot with diesels, but alot on petrol engines and gas conversions having done alot of work on my old corolla. but anywho, just wondering if anyone has encountered this before and if it has a real purpose?
the centre flat of steel is the size of the pipework entering for the snorkel. so the air has to diffuse around that to get into the motor.
i am wondering, what would be the effect of removing that plate, im thinking of either putting a hole saw just smaller than the centre (i conveniantly have a 76mm hole saw) or just cut the whole thing out to make life simple.
what do people think and does anyone have any experience in this?
cheers guys, andrew
p.s. sorry for the essay
Last week i bought a 1997 TD42 patrol ute with what is said to be a 4" lift. its on 315/75R16 cooper S/T tyres.
driving, it is nothing compared to my old corolla with a supra motor, but i felt it went alright for a diesel in a big truck. however, i was expecting decent economy.
i filled up, got 70 litres in the tank, and after 350 km's its now around 1/4 remaining. which is really quite bad in my opinion for what has essentially been mainly highway driving....
i find the ute losses alot of pace up hills and really struggles to maintain speed, even when you drop it back a cog and really found this quite unexpected being a big diesel.
so i thought i would start with checking for any obstructions to airflow and im gonna check the fuel filters etc to ensure everything there is good.
so i think that informs more or less with whats going on.
so as i said, i went looking for air restrictions etc, and came across this puppy...
thats the bit that goes just inside of the gaurd and connects to the snorkel.
To me, that is a massive air restriction and goes against everything i know, albeit, not alot with diesels, but alot on petrol engines and gas conversions having done alot of work on my old corolla. but anywho, just wondering if anyone has encountered this before and if it has a real purpose?
the centre flat of steel is the size of the pipework entering for the snorkel. so the air has to diffuse around that to get into the motor.
i am wondering, what would be the effect of removing that plate, im thinking of either putting a hole saw just smaller than the centre (i conveniantly have a 76mm hole saw) or just cut the whole thing out to make life simple.
what do people think and does anyone have any experience in this?
cheers guys, andrew
p.s. sorry for the essay
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
ta, i was just wondering that.
none of the snorkel connections seem to be particularly water tight so i may have to look into sorting all of it.
i may pull that off and see what difference it makes before anything.
i checked the filter, looked new, didnt check brand though. will do when i get a chance.
cheers for that
any theories on poor economy, and the reason i have to keep the throttle a decent way open to keep it moving at 100kph?
thanks again
pills11.com )
none of the snorkel connections seem to be particularly water tight so i may have to look into sorting all of it.
i may pull that off and see what difference it makes before anything.
i checked the filter, looked new, didnt check brand though. will do when i get a chance.
cheers for that
any theories on poor economy, and the reason i have to keep the throttle a decent way open to keep it moving at 100kph?
thanks again
pills11.com )
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
..
Looks likea hiclone to me...
XXDXDXDXD
XXDXDXDXD
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Naturally aspirated td42, 315s and crap fuel economy go hand in hand.
The drum thing is Nissans version of a cyclonic pre-cleaner.
Either put smaller tyres on it or turbo it.
The drum thing is Nissans version of a cyclonic pre-cleaner.
Either put smaller tyres on it or turbo it.
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Who is online
Users browsing this forum: No registered users and 64 guests