OOPS - took all the rubber hoses off the throttle body as part of the engine rebuild, thinking that the manual would have easy to read
schematics....
Wrong - there are schematics allright, but dont have the correct number
of lines etc.... ( and are #$%^ hard to follow )
Can someone please look at their F300 HD-E Feroza and tell me where
the rubber lines connected to the throttle body actually go, and where on
the throttle body they are connected ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Feroza Throttle Body plumbing
Moderator: Tiny
The 6mm lines go to the flux capacitor. Make sure the 8mm line is hooked up through the magnet in the right direction or else you will loose 10% of your power.
The 4" hose hooks up to the leaf blower.
Sorry couldn't resist
Steve.
The 4" hose hooks up to the leaf blower.
Sorry couldn't resist
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest