Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rocky engine WHAT THE??
Moderator: Tiny
Rocky engine WHAT THE??
Pulled the rocker cover off today and the rockers to re-tention the head. Anyway, long story short, when you tighten the ROCKER COVER bolts, any tighter than finger tight, it kills the engine WTH is going on? Without the rocker cover on, it runs fine. Put it on finger tight, runs fine. Try and tighten one of the bolts, and it looses compression on the cylinder under that bolt. Tighten all of them and you could stop the engine. Is this normal?(i'm guessing not) so what the hell can be causing it
60 + Turbo, 33"s :armsup:
well this problem has sorta been ignored by me on account of more irritating problems(electrical).
But, There's no wires or anything else under there that can be caught, the gasket looks to be rubber its pretty thick, and AFAIK the original one, could a cracked or warped head have this effect? or contribute to it somehow?
But, There's no wires or anything else under there that can be caught, the gasket looks to be rubber its pretty thick, and AFAIK the original one, could a cracked or warped head have this effect? or contribute to it somehow?
60 + Turbo, 33"s :armsup:
lol, yeah its around right.
Shown 2 mechanics and they are both baffled. One rang up a diesel specialist, been doing diesel's all his life and he doesn't believe him , wants to come and see it for himself. At this rate, I just need some publicity, then charge and admission fee to see it and I'll be set
Shown 2 mechanics and they are both baffled. One rang up a diesel specialist, been doing diesel's all his life and he doesn't believe him , wants to come and see it for himself. At this rate, I just need some publicity, then charge and admission fee to see it and I'll be set
60 + Turbo, 33"s :armsup:
whats the mudholes looking like these days? i might come past, swing ya 5bob have a look then go for a playRockyF70 wrote: then charge and admission fee to see it and I'll be set
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
read the location line, i've moved, its a flamin long swing to come out herej-top paj wrote:whats the mudholes looking like these days? i might come past, swing ya 5bob have a look then go for a playRockyF70 wrote: then charge and admission fee to see it and I'll be set
But I rekon they'd be full as after all the rain.
60 + Turbo, 33"s :armsup:
riverina riverstone sounds the same...
where is riverina anyways? like out on the murray or something?
where is riverina anyways? like out on the murray or something?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 0 guests