Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I do backyarders in Gippsland, Latrobe Valley
Moderator: -Scott-
I do backyarders in Gippsland, Latrobe Valley
Hey, Im a qualified Auto Electrician in Gippsland in Victoria... I do backyarders to pay for my toys and stuff so if anyone needs anything done give me a yell... or if anyone needs any advice on here give me a yell...
I am upgrading my headlights in my GQ and i just bought a set of Tungsram 100/80W globes and a relay that is a New-Era NLR-132 12v.30ax2 the auto elec that i bought it from drew me a diagram but its makes no sense it only has one wire to the lights and the globe has three prongs on it???
Confused
Confused
LiVe HaRd DiE sIdE wAyS
The diagram is probably correct but not fully detailed.sierrafreak wrote:I am upgrading my headlights in my GQ and i just bought a set of Tungsram 100/80W globes and a relay that is a New-Era NLR-132 12v.30ax2 the auto elec that i bought it from drew me a diagram but its makes no sense it only has one wire to the lights and the globe has three prongs on it???
Confused
Assuming your relay is one of those that has onboard fuses, it's pretty straight forward and we can run you through it. Unless you want to cut wires you'll want to get a pair of H4 plugs from supercheap, autobarn or wherever, although you can just use six female spade terminals (8.something mm I think) if you are really against spending an extra ten bucks.
I am not sure if you want DIY instructions or you want RRover85 to do it for you so I'll leave it there for now!
This is not legal advice.
And I thought you only worked on things big and yellow???
The boy does good work. I worked with him for a few years.......
The boy does good work. I worked with him for a few years.......
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
must be cos he hasn't replied to mine either-Scott- wrote:He's too busy doing backyarders to check OL!Remydog05 wrote:Then Why doesnt he reply to his Pm message??
Cant get him to work if he wont reply???
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
GQ Bear wrote:must be cos he hasn't replied to mine either-Scott- wrote:He's too busy doing backyarders to check OL!Remydog05 wrote:Then Why doesnt he reply to his Pm message??
Cant get him to work if he wont reply???
Best you stop in for a beer if you head down this way
Wanted: Car trailer or beaver tail truck, let me know what you got
Who is online
Users browsing this forum: No registered users and 1 guest