Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Surf 2.4 Power steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Surf 2.4 Power steering

Post by Weiner »

Hey guys, just wonderng if the powersteering gear off a 2.4L Surf will fit the 3L 2.8 Hilux.

Thanks, Aidan
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Anyone? :?:
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 68
Joined: Thu May 05, 2005 6:24 pm
Location: Gold Coast

Contact:
Contact hylux

Post by hylux »

ok here goes.... the motor itself doesent make a difference, so yes...... But, if the pump is off a 2lte motor it mounts low on the drivers side which means it won't fit in a hilux with a solid axel with a torsion bar, the torsion bar gets in the way.

so I hope that makes sense.
84 Hilux 2.4l turbo, 2" Body lift ......
Power Steering ;) ....
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

hylux wrote:ok here goes.... the motor itself doesent make a difference, so yes...... But, if the pump is off a 2lte motor it mounts low on the drivers side which means it won't fit in a hilux with a solid axel with a torsion bar, the torsion bar gets in the way.

so I hope that makes sense.
Ok thanks heaps, makes complete sense.

Cheers, Aidan :D
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Surf 2.4 Power steering

Post by Guy »

Weiner wrote:Hey guys, just wonderng if the powersteering gear off a 2.4L Surf will fit the 3L 2.8 Hilux.

Thanks, Aidan
The pump bracketry will not transfer between the blocks as the mounts are different.
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Re: Surf 2.4 Power steering

Post by Weiner »

love_mud wrote:
Weiner wrote:Hey guys, just wonderng if the powersteering gear off a 2.4L Surf will fit the 3L 2.8 Hilux.

Thanks, Aidan
The pump bracketry will not transfer between the blocks as the mounts are different.
But if I get a different mount or make one up?
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

don't know anything can be moded to fit just how much $ and time will it take up maybe faster to get the one to suit 3L power steer pump is on lh lower side of engine if anyone was wondering
plenty of parts on the bench
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Sic Lux wrote:don't know anything can be moded to fit just how much $ and time will it take up maybe faster to get the one to suit 3L power steer pump is on lh lower side of engine if anyone was wondering
I agree totally.
If you do have a 2L PS pumps and mounts I will hunt you down a 3L pump and mounts to do a swap.
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Nah have no P/S now but want it.

I will just keep searching for the 3L stuff.

Thanks guys
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 87 guests