Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where do people buy steel on the south side of Bris or Ipswich? I used to get what I needed from where I was working but now I fly in/out it's a bit tough to get a couple of metres on the plane.
I don't want to have to buy lengths and lengths. I just want to have a go at building a front bar for my 45 and a few other little jobs. So who is good to deal with?
phippsy wrote:Jackson's at Redbank and there is another good steel place at the back of Redbank near the Cunningham Hwy but I can't think of their name.
This near the pub and little takeaway joint or over the train line on goodna backroad.
Almost finished my front bar; used steel from direct steel, and hans welding works. Hans' also did some bending of 3mm plate for me, cheap and the guy who did it was excelent.
Wheeling on completely wicked angles, without even looking stable.
