Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Can I put a turbo easily onto a 2.8 Triton
Moderator: -Scott-
Can I put a turbo easily onto a 2.8 Triton
I have a MK Triton with a 2.8 non turbo. Will a Mits' 2.8 turbo and manifold just bolt up or will I be better going aftermarket?
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
In a word yes, with some buts!
the manifold and turbo will bolt straight on, but the turbo motor runs less compression via different pistons (protrusion above block 0.55 to 0.77 non turbo, 0.45 to 0.67 turbo).
the injection pump on the turbo also runs a boost compensator.
not sure what other differences the two motors run.
cookie monster
the manifold and turbo will bolt straight on, but the turbo motor runs less compression via different pistons (protrusion above block 0.55 to 0.77 non turbo, 0.45 to 0.67 turbo).
the injection pump on the turbo also runs a boost compensator.
not sure what other differences the two motors run.
cookie monster
99 GU Patrol Wagon 4.2td
Who is online
Users browsing this forum: No registered users and 1 guest