Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

UPH11R.......It's back

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

UPH11R.......It's back

Post by SAWZALL »

Nothing like moving house to get you motivated enough to get your truck back on the road. Was gonna be too much of a drama to engineer with SPOA and 35's so I mounted the diffs back above the springs and got some second hand 31's.

Doesn't look as bad as I thought it would. Had to get it back on the road for some summer trips.

Anyone know where I can source one of those covers that just covers the tray area like a torneau cover?????

Look forward to taking it out on some mild trips.
Gone drag racing......
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Good to hear, better post some pics (& alter your sig)
yeshemesh
Top
Posts: 91
Joined: Fri Nov 08, 2002 9:44 pm
Location: Sydney

Post by thaoldman »

Did you not have a white hardtop before ??
Top
Posts: 91
Joined: Fri Nov 08, 2002 9:44 pm
Location: Sydney

Post by thaoldman »

Did you not have a white hardtop before ??
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Yeah I had a white hardtop with 33 swampers, Calmini 4 to 1 transfer, raised flares etc but I've had this one for about 6 years

Can anyone help out with

* flare extensions
* factory roll bar
* front locker
* rear locker
* transfer gears
* summer practice :D

I'm moving up Maitland way so there should be heaps of 4 wheelin over summer........can't wait!!!! :cool:
Gone drag racing......
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

uphiir wrote:I'm moving up Maitland way so there should be heaps of 4 wheelin over summer........can't wait!!!! :cool:


cool im always up for a wheel :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

About time you pulled your finger out :D Why not put the springover baack in. :?:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

It's gonna be easier to get registered spring under. It only takes 2 hours to swap it spoa>spua or vica versa.

Oh and the people are after pics, sam :finger:
Gone drag racing......
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Leave it sprung over and I'll think about it. :finger:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Todays update:
refitted the targa bar, doors, tailgate, springs, diffs, changed steering back to standard, refitted dash and attempted to start it......anyone got a carby to suit a 94 Sierra????

Fuel p1ssed out of every join :cry: I pulled it apart and all the seals, plungers and gaskets are rooted. Sitting around for 4 years can do that

Parts needed:
rubber flare extenders
carby :cry:
driveshaft bolts........I've obviously put them somewhere so I don't lose them :?
4 U bolts for front springs

Things to do tomorrow:
Make a tube front bumper
redo brakes
Chase up above listed parts

The reason I'm not staying SPOA (for those interested) is that the car may have to do some mileage over summer (between Maitland and Sydney). Car is a LOT more stable (esp over Mooney Mooney) SPUA.
Gone drag racing......
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

WAHOOO, IT DRIVES......

Todays update:
Fitted another carby (BIG THANX TO SAM AT OVERKILL)
Fitted new U bolts (BIG THANX TO SAM AT OVERKILL)
bled brakes
fitted tailshaft
Jigged up front bar

I think the carby might need overhauling but I'll run some new (ie not 4 year old) fuel thru it and see how it goes.

Plans for tomorrow:
Flare extensions
Finish front bar
Plan Mods :cool:
Gone drag racing......
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

uphiir wrote:Plans for tomorrow:
Flare extensions
Finish front bar
Plan Mods :cool:
TAKE PICS ;)
yeshemesh
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Todays progress:

Fitted flare extensions
refitted standard seats
took front bar to be welded
bent up rollbar
made a battery bracket

took it out of the garage and drove it up on some car ramps set up diagnally with 2 inch blocks of wood under them. Still all 4 firm on ground, not too bad for a SPUA

Rear locker, low transfer box and plenty of practice to come

BIG thanx to Sam at Overkill for all his help :cool:
Gone drag racing......
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

uphiir wrote:Rear locker, low transfer box,plenty of practice AND PICS to come
Ransom note = demand + collage
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Todays update:
Did some more work on the roll bar
Spent about 4 hours staring at the car planning what to mod
Car has G*P springs in the front and is a rough as guts. Thinking OME rears up front.....

Everyone is keeping an eye out for lockers and low transfer gears, aren't they??????
Gone drag racing......
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

And the PICs are where???
;)
yeshemesh
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Hopefully I can borrow a digi cam soon
Gone drag racing......
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

uphiir wrote:Hopefully I can borrow a digi cam soon


Don't worry about those people that bug your for pics mate... they have just lost the ability to visualise ;)
DMA Founding Member #1 - Now Retired
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I know I laughed all the way thru your thread at that hehehe
Gone drag racing......
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

i will be selling my series 3 transfer soon. If you dont find another one you can wait for mine. I have only driven on it about 5 or 6 times
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I'll let you know

Todays Update:

Bahahhahaha
I forgot I stripped the front end out of this Zuk to fix my other one :cry:
What that means is that my front end has no driveshafts or crown wheel Muhhahhahbohohooho
Ah well gives me something else to chase up
Gone drag racing......
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

I might be able to help you :D :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Hahahaha

UPH11R brought to you by Overkill 4x4
Gone drag racing......
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 42 guests